重庆科技大学学报（自然科学版）2024，Vol.26Issue(4)：105-112,8.DOI:10.19406/j.issn.2097-4531.2024.04.014
旋转下套管装置卡瓦牙结构优化
Optimization of the Slip Tooth Structure of the Rotating Casing Device
摘要
Abstract
The design of the rotary casing device's slip teeth is unreasonable,which can easily cause problems such as wear of the slip tooth and damage to the casing.To address the above issues,a numerical calculation model for clamping the casing with a slip plate is established to study the influence of slip tooth shape and slip tooth structural parameters on the mechanical properties of the slip tooth and the casing.The results indicate that under different slip tooth shapes,the maximum stress on the slip plate and the casing is located at both ends,and the flat top tooth shape is the most reasonable.In addition,the contact pressure,slip tooth stress,and the casing stress rises with the in-crease of the front angle α of the slip tooth,rear corner β and tooth pitch S and decreases with the increase of tooth top width W.Finally,with contact pressure,slip tooth stress,and the casing stress as optimization objectives,and slip tooth structural parameters as design variables,the optimized slip tooth structural parameters using orthogonal ex-perimental method are the slip tooth front angle α=20°,rear corner β=45°,tooth height H=1.2 mm,and tooth pitch S=3 mm.After optimizing the slip tooth,it can greatly improve the service life of the rotating casing device.关键词
旋转下套管装置/卡瓦牙/有限元分析/优化设计Key words
rotating casing device/slip tooth/finite element analysis/optimal design分类
能源科技引用本文复制引用
谢帅,罗乙凯,朱祥龙,邹鑫,曾国恩,彭佳辉..旋转下套管装置卡瓦牙结构优化[J].重庆科技大学学报（自然科学版）,2024,26(4):105-112,8.基金项目
石油天然气装备教育部重点实验室资助项目"旋转下套管装置夹持系统理论研究与结构优化"(OGEHH202002) （OGEHH202002）
重庆科技大学科技创新项目"旋转下套管装置夹持系统理论研究与结构优化"(YKJCX2220303) （YKJCX2220303）
