纺织工程学报2024，Vol.2Issue(4)：25-34,10.
垂直取向石墨烯微片/环氧树脂复合材料的制备与性能研究
Preparation and performance study of vertically oriented graphene microsheets/epoxy resin composites
刘慧瑜 1李蕾 1张文忠 2张岩1
作者信息
- 1. 苏州大学纺织与服装工程学院,江苏苏州 215123
- 2. 山东滨州亚光毛巾有限公司,山东滨州 256651
- 折叠
摘要
Abstract
As mcroelectronic devices often generate a lot of heat in the process of operation,improving the thermal conductivity of electronic packaging materials has become an urgent problem to be solved.Polymer materials are now the preferred substrates for electronic packaging materials,with the introduction of high thermal conductivity fillers effectively improving their thermal properties.However,it is still necessary to control the amount of filler to balance cost,process scalability,and product performance.In order to solve the above problems,submicron particles of ferroferric oxide(Fe3O4)are grown in situ on GNP by solvothermal method using graphene microsheets(GNP)as raw materials to obtain graphene-ferroferric oxide hybrids.The thermal GNP@Fe3O4/EP composites with vertical orientation of GNP@Fe3O4/EP are prepared by high temperature curing under magnetic field conditions after mixing the above hybrids as fillers with epoxy resin(EP).The thermal conductivity of the composites can reach 0.633 W/(m·K)when the filler content is 25wt%,which is 375%of the thermal conductivity of pure EP.This method effectively improves the thermal conductivity of epoxy resin matrix in the out-of-plane direction under low load.关键词
导热复合材料/石墨烯/四氧化三铁/垂直取向结构/热导率Key words
thermally conductive composites/gaphene/ferroferric oxide/vertically oriented structure/thermal conductivity分类
轻工纺织引用本文复制引用
刘慧瑜,李蕾,张文忠,张岩..垂直取向石墨烯微片/环氧树脂复合材料的制备与性能研究[J].纺织工程学报,2024,2(4):25-34,10.
