| 注册
首页|期刊导航|建筑结构学报|胶合木预应力套管螺栓连接梁柱节点受力性能

胶合木预应力套管螺栓连接梁柱节点受力性能

何敏娟 戴鹏飞 李征

建筑结构学报2024,Vol.45Issue(9):253-261,9.
建筑结构学报2024,Vol.45Issue(9):253-261,9.DOI:10.14006/j.jzjgxb.2023.0405

胶合木预应力套管螺栓连接梁柱节点受力性能

Mechanical performance of glulam beam-column joints with prestressed tube bolts

何敏娟 1戴鹏飞 2李征1

作者信息

  • 1. 同济大学建筑工程系,上海 200092||同济大学土木工程防灾减灾全国重点实验室,上海 200092
  • 2. 同济大学建筑工程系,上海 200092
  • 折叠

摘要

Abstract

The connection of beams and columns in glulam structures often adopts the bolt connection with steel plates,which connects beam and column components through embedded steel plates and bolts.However,this connection method has problems such as large gaps between bolt holes and bolt rods,low initial stiffness and wood splitting.In order to increase the initial stiffness of the joint and improve the problem of wood splitting in the existing failure mode,a joint construction was proposed,in which the flange of the T-shaped steel connector is connected to the column sides with split bolts,and the web of the T-shaped steel connector is inserted into the beam end and tightly connected to the beam end with the prestressed tube bolts.To study the influence of tube shape on the mechanical performance of joints,the prestressed tube bolted glulam joint specimens with square tubes and circular tubes were made respectively,and monotonic and cyclic loading tests were carried out.Based on the experiments,the stiffness,bearing capacity,and ductility of the joints were studied,and the mechanical performance of bolted joints with prestressed tubes of different shapes was analyzed.The results indicate that compared with the traditional steel plate bolted joints,the initial stiffness of the proposed beam-column joints with prestressed tube bolts is increased by more than two times.Using square tubes can delay wood splitting and slow down the stiffness degradation of the joint,but the ultimate bearing capacity is 9%lower than those of circular tubes.

关键词

胶合木结构/梁柱节点/预应力套管螺栓连接/套管形状/拟静力试验/受力性能

Key words

glulam structure/beam-column joint/prestressed tube bolted connection/tube shape/pseudo-static test/mechanical performance

分类

建筑与水利

引用本文复制引用

何敏娟,戴鹏飞,李征..胶合木预应力套管螺栓连接梁柱节点受力性能[J].建筑结构学报,2024,45(9):253-261,9.

基金项目

国家自然科学基金项目(52078371),上海市科技创新行动计划技术标准项目(23DZ2204200). (52078371)

建筑结构学报

OA北大核心CSTPCD

1000-6869

访问量0
|
下载量0
段落导航相关论文