| 注册
首页|期刊导航|武汉工程大学学报|铜离子掺杂聚乙烯亚胺/碳纳米管热电薄膜的制备与表征

铜离子掺杂聚乙烯亚胺/碳纳米管热电薄膜的制备与表征

李赞 李怡 蒋朵 杜飞鹏 张云飞

武汉工程大学学报2024,Vol.46Issue(4):398-403,6.
武汉工程大学学报2024,Vol.46Issue(4):398-403,6.DOI:10.19843/j.cnki.CN42-1779/TQ.202312024

铜离子掺杂聚乙烯亚胺/碳纳米管热电薄膜的制备与表征

Preparation and characterization of copper ions-doped polyethyleneimine/carbon nanotubes thermoelectric thin films

李赞 1李怡 1蒋朵 1杜飞鹏 1张云飞1

作者信息

  • 1. 武汉工程大学材料科学与工程学院,湖北 武汉 430205
  • 折叠

摘要

Abstract

Using single-wall carbon nanotubes(SWCNTs)as matrix and an appropriate amount of Cu2+or[Cu(NH3)4]2+and polyethyleneimine(PEI)as dopants,Cu2+-PEI/SWCNT and[Cu(NH3)4]2+-PEI/SWCNT composite thin films were prepared through solution blending and vacuum filtration methods.The structures and properties of the composite films were characterized using scanning electron microscopy,energy-dispersive X-ray spectroscopy,infrared spectroscopy,Raman spectroscopy,and thermoelectric instrument.The results reveal that optimizing the SWCNT carrier concentration and mobility enhances the system conductivity when doping with an appropriate amount of Cu2+and PEI.The maximum conductivity achieved is 1 101.3 S·cm-1,with the highest power factor of 93.4 μW·m-1·K-2.Doping with[Cu(NH3)4]2+and PEI only increased the SWCNT carrier mobility,significantly enhancing the system's Seebeck coefficient,with a maximum value of 45.0 μV·K-1,and the highest power factor of 72.3 μW·m-1·K-2.The mechanisms through which Cu2+and[Cu(NH3)4]2+enhance the thermoelectric performance of SWCNT are different,but both power factors surpassing that of PEI/SWCNT(55.7 μW·m-1·K-2).

关键词

铜离子/铜氨离子/聚乙烯亚胺/单壁碳纳米管/复合薄膜/热电性能

Key words

copper ions/copper ammonia ions/polyethyleneimine/single-wall carbon nanotubes/composite film/thermoelectric performance

分类

化学化工

引用本文复制引用

李赞,李怡,蒋朵,杜飞鹏,张云飞..铜离子掺杂聚乙烯亚胺/碳纳米管热电薄膜的制备与表征[J].武汉工程大学学报,2024,46(4):398-403,6.

基金项目

国家自然科学基金(51803157) (51803157)

武汉工程大学学报

1674-2869

访问量0
|
下载量0
段落导航相关论文