徐州工程学院学报（自然科学版）2024，Vol.39Issue(3)：5-10,65,7.
星载激光雷达望远镜主次镜支撑结构设计与分析
Design and Analysis of the Supporting Structure Between the Primary and Secondary Mirrors of Space-borne Lidar Telescope
摘要
Abstract
In accordance with the design specifications of the space-borne Lidar Telescope,the supporting structure and components between the primary and secondary mirrors were meticulously engineered to align with the criteria of material selection,structural form and lightweight design.The secondary mirror components were manufactured with a mass of only 0.530 kg,while the supporting structure between the primary and secondary mirrors was constructed with a mass of 1.000 kg.This resulted in a final structure for the telescope with a total mass of only 10.600 kg.The surface figure and relative position of the primary and secondary mirrors,as well as the gravity deformation and mode of the entire machine,were subjected to intensive study through the method of finite element modelling and analysis.The surface figure root mean square(RMS)of the primary and secondary mirror is superior to λ/40(λ@632.8 nm).The design of the supporting structure and components for the primary and secondary mirrors was found to satisfy the specified requirements in terms of stiffness and environmental adaptability.The results demonstrate that the design objectives for the supporting structure and components of the primary and secondary mirrors have been achieved,thus providing a framework for the structural design of similar telescopes.关键词
星载激光雷达/次镜组件/支撑结构/有限元分析/RMSKey words
space-borne lidar/secondary mirror module/supporting structure between primary and secondary mirror/element finite analysis/RMS分类
信息技术与安全科学引用本文复制引用
李路,於天乐,荣莉,邢昆明,张建军,张陈哲,赵明..星载激光雷达望远镜主次镜支撑结构设计与分析[J].徐州工程学院学报（自然科学版）,2024,39(3):5-10,65,7.基金项目
安徽省教育厅自然科学研究重点项目(KJ2021A0945) （KJ2021A0945）
淮南师范学院校企合作项目(2023HX215) （2023HX215）
皖西学院高层次人才项目(WGKQ2022013) （WGKQ2022013）
安徽省大学生创新创业训练计划项目(SS202210376137) （SS202210376137）
