重型机械Issue(4)：33-36,54,5.
中厚板阻尼单辊驱动轧制的接触摩擦特性研究
Research on contact friction characteristics of single roll drive with medium and thick plate damping
摘要
Abstract
To utilize the advantages of single-roll driven rolling for medium-thickness plates,single-roll driven rolling is improved by adding damping to the upper roll system when only the lower roll is driven by the motor.The elastic-plastic finite element method is used to establish a finite element simulation model of single-roll driven rolling of medium-thick plate with damping,and simulation analysis is carried out for a variety of working conditions under different friction coefficients.The calculation results show that:the larger the friction factor of the contact surface,the asymmetry of the material flow velocity distribution,the length of the rolling area,the friction stress difference and the rolling pressure increase,and there is no significant change in the contact arc length.关键词
单辊驱动/中厚板轧制/摩擦系数/有限元模型/搓轧区Key words
single roll drive/medium and thick plate rolling/friction coefficient/finite element model/cross-shear zone分类
矿业与冶金引用本文复制引用
宋苑菁,王琛,江连运,赵春江..中厚板阻尼单辊驱动轧制的接触摩擦特性研究[J].重型机械,2024,(4):33-36,54,5.基金项目
国家自然科学基金(52275358) （52275358）
山西省重点研发计划项目(2022ZDYF038) （2022ZDYF038）
中央引导地方科技发展资金项目(YDZJSX20231A048) （YDZJSX20231A048）
