| 注册
首页|期刊导航|材料科学与工程学报|微波烧结对(Mg0.9Zn0.1)TiO3-(Ca0.61La0.26)TiO3陶瓷性能的影响

微波烧结对(Mg0.9Zn0.1)TiO3-(Ca0.61La0.26)TiO3陶瓷性能的影响

赵莉 胡玉叶 潘福婷 温学涛 蒋亚龙

材料科学与工程学报2024,Vol.42Issue(4):647-650,4.
材料科学与工程学报2024,Vol.42Issue(4):647-650,4.DOI:10.14136/j.cnki.issn1673-2812.2024.04.015

微波烧结对(Mg0.9Zn0.1)TiO3-(Ca0.61La0.26)TiO3陶瓷性能的影响

Effects of Microwave Sintering on the Properties of (Mg0.9Zn0.1)TiO3-(Ca0.61La0.26)TiO3 Ceramics

赵莉 1胡玉叶 1潘福婷 1温学涛 1蒋亚龙1

作者信息

  • 1. 安徽省高等学校建筑结构重点实验室/安徽新华学院,安徽合肥 230088
  • 折叠

摘要

Abstract

(1-x)(Mg0.9Zn0.1)TiO3-x(Ca0.61La0.26)TiO3 (x=0.15,referred to as 85M9Z1CLT) system ceramics were prepared by microwave sintering and conventional sintering.The experimental results demonstrated that the sintering cycle of 85M9Z1CLT ceramics was greatly shortened and the impurity phase (Mg0.9Zn0.1)Ti2O5 was eliminated by microwave sintering.Moreover,the 85M9Z1CLT ceramics prepared by microwave sintering show more uniform,fine-grained microstructure as well as much less Zn evaporation.As a result,the quality factor was increased by 21% compared with conventional sintering.All samples were sintered at 1325 ℃ for 20min with heating and cooling rate of 15 ℃/min and gave excellent microwave dielectric properties:εr=25.63,Q·f=116,000 GHz,τf=+1×10-6/℃.

关键词

85M9Z1CLT/微波烧结/介质陶瓷/介电性能

Key words

85M9Z1CLT/Microwave sintering/Dielectric ceramic/Dielectric property

分类

化学化工

引用本文复制引用

赵莉,胡玉叶,潘福婷,温学涛,蒋亚龙..微波烧结对(Mg0.9Zn0.1)TiO3-(Ca0.61La0.26)TiO3陶瓷性能的影响[J].材料科学与工程学报,2024,42(4):647-650,4.

基金项目

安徽省高校自然科学研究重点项目(2024AH050627,2024A050602,2024AH050599,2024AH050606,KJ2021A1172) (2024AH050627,2024A050602,2024AH050599,2024AH050606,KJ2021A1172)

省级大学生创新创业训练计划项目(AH202112216120,碳纤维再生混凝土力学性能的研究,玄武岩纤维对再生混凝土强度的影响,5G通信用钛酸镁基微波介质陶瓷精细微观结构优化,钢纤维对再生混凝土强度的影响) (AH202112216120,碳纤维再生混凝土力学性能的研究,玄武岩纤维对再生混凝土强度的影响,5G通信用钛酸镁基微波介质陶瓷精细微观结构优化,钢纤维对再生混凝土强度的影响)

安徽省高校优秀科研创新团队项目(2023AH010059) (2023AH010059)

材料科学与工程学报

OA北大核心CSTPCD

1673-2812

访问量0
|
下载量0
段落导航相关论文