折叠光路结构头戴显示器的光学设计OA北大核心CSTPCD
Optical design of pancake structured head-mounted display
为了满足虚拟现实头戴显示器大视场、大出瞳和高成像质量且结构轻小化等要求,采用逆向光路设计方法,对折叠光路pancake结构展开研究;采用两片透镜进行设计,进行了理论分析和软件仿真,对设计的光学系统进行了公差分析.结果表明,全视场角为96°、出瞳直径为10 mm、出瞳距离为14.94 mm时,在奈奎斯特频率(20.83 lp/mm)处调制传递函数(MTF)大于0.2,最大畸变为-26.5%,最大垂轴色差为 13.84 μm;此结构具有更高的MTF值…查看全部>>
In order to meet the requirements of large field of view,large exit pupil,high imaging quality and light and small structure of virtual reality head-mounted display,a reverse optical path design method was adopted to study pancake structure of a folding optical path.Two lenses were designed for theoretical analysis and software simulation,and the tolerance analysis of the designed optical system was carried out.The results show that the full field Angle is 9…查看全部>>
柏香虎;朱向冰;庄亚宝;程芳芳;许子豪;朱俊峰
安徽师范大学 物理与电子信息学院,芜湖 241002,中国安徽师范大学 物理与电子信息学院,芜湖 241002,中国安徽师范大学 物理与电子信息学院,芜湖 241002,中国安徽师范大学 物理与电子信息学院,芜湖 241002,中国安徽师范大学 物理与电子信息学院,芜湖 241002,中国安徽师范大学 物理与电子信息学院,芜湖 241002,中国
物理学
光学设计头戴显示器折叠光路虚拟现实
optical designhead mounted displayfolding optical pathvirtual reality
《激光技术》 2024 (5)
746-751,6
评论