| 注册
首页|期刊导航|汽车工程学报|车辆发动机舱非金属零部件热老化寿命研究

车辆发动机舱非金属零部件热老化寿命研究

欧阳俊 袁侠义 肖露 彭家燕 段炼

汽车工程学报2024,Vol.14Issue(5):888-897,10.
汽车工程学报2024,Vol.14Issue(5):888-897,10.DOI:10.3969/j.issn.2095‒1469.2024.05.15

车辆发动机舱非金属零部件热老化寿命研究

Research on Thermal Aging Life of Non-Metallic Components in Vehicle Engine Compartments

欧阳俊 1袁侠义 1肖露 1彭家燕 1段炼1

作者信息

  • 1. 广州汽车集团股份有限公司 汽车工程研究院,广州 511434
  • 折叠

摘要

Abstract

Thermal oxygen aging is one of the primary thermal failure modes for non-metallic components in the engine compartment.The traditional vehicle thermal management development process typically only focuses on the maximum working temperature of components,which is insufficient for effectively predicting the thermal degradation of these parts over their lifecycle.Based on China's climate conditions and extensive vehicle driving data,an equivalent thermal aging driving condition model is established to evaluate the thermal aging life of components.Using this method,the thermal aging life of an engine mount rubber bushing is evaluated.It is found that improving the rubber material formula increases its thermal aging life by approximately 3 times.However,if the operating temperature of the rubber bushing increases by 10℃,its thermal aging life decreases by about 50.0%.In addition,an analysis of the heat transfer path of the rubber bushing shows that its actual working temperature can be lowered by optimizing the fan wake and reducing heat conduction between the engine and the rubber bushing,thereby improving its thermal aging life.

关键词

发动机舱/热老化寿命/等效行驶工况/温度分布/热衰退

Key words

underhood/thermal aging life/equivalent driving condition/temperature distribution/thermal degradation

分类

交通工程

引用本文复制引用

欧阳俊,袁侠义,肖露,彭家燕,段炼..车辆发动机舱非金属零部件热老化寿命研究[J].汽车工程学报,2024,14(5):888-897,10.

汽车工程学报

OACSTPCD

2095-1469

访问量0
|
下载量0
段落导航相关论文