| 注册
首页|期刊导航|流体机械|内混式空气雾化喷嘴雾化影响因素试验与仿真研究

内混式空气雾化喷嘴雾化影响因素试验与仿真研究

郑沂怡 李文璞 邵和 王鑫 高玉荣 陈曦

流体机械2024,Vol.52Issue(9):39-47,9.
流体机械2024,Vol.52Issue(9):39-47,9.DOI:10.3969/j.issn.1005-0329.2024.09.006

内混式空气雾化喷嘴雾化影响因素试验与仿真研究

Experimental and simulation study on the influencing factors of atomization of internal mixing air atomizing nozzles

郑沂怡 1李文璞 2邵和 1王鑫 1高玉荣 1陈曦1

作者信息

  • 1. 太原理工大学 安全与应急管理工程学院,太原 030024
  • 2. 太原理工大学 安全与应急管理工程学院,太原 030024||矿山岩层控制及灾害防控山西省重点实验室,太原 030024||山西省煤基资源绿色高效开发工程研究中心,太原 030024
  • 折叠

摘要

Abstract

In order to study the applicability of three types of internal mixing air atomization nozzles,the atomization characteristics of the air atomization nozzles were analyzed,and the influence of structural parameters on the atomization characteristics of the nozzles was determined.A three-dimensional steady-state model was established based on the VOF two-phase flow model and Realizable k-ε turbulence model to analyze the atomization process,pressure and velocity variations within the mixing chamber of these nozzles.An atomization experimental platform was set up to study their atomization characteristics.The results indicate that the droplet size of the nozzles is negatively related to air supply pressure and positively related to water pressure.Droplet velocity shows an increasing trend with higher water and air supply pressure.The atomization of the 1st nozzle is significantly influenced by operational parameters,it can achieve an atomization angle of around 90°,a range of 4.7 m,and a minimum droplet size of 8 μm,demonstrating excellent overall atomization performance.The 2nd nozzle compresses large droplets with air,dispersing them to the sides,resulting in a spray angle of approximately 141° and a range of about 1.5 m.The 3rd nozzle concentrates the liquid phase under action of compressed air in the center,producing an atomization angle of around 20°,a range of up to 3.7 m,and a droplet velocity of approximately 28 m/s.The research results provide theoretical guidance for nozzle design and improvement of spray dust suppression system.

关键词

内混式雾化喷嘴/数值模拟/雾化特性/结构参数

Key words

internal-mixing nozzle/numerical simulation/atomization characteristics/structural parameters

分类

机械制造

引用本文复制引用

郑沂怡,李文璞,邵和,王鑫,高玉荣,陈曦..内混式空气雾化喷嘴雾化影响因素试验与仿真研究[J].流体机械,2024,52(9):39-47,9.

基金项目

国家自然科学基金项目(51804210,51704145) (51804210,51704145)

流体机械

OA北大核心CSTPCD

1005-0329

访问量0
|
下载量0
段落导航相关论文