|国家科技期刊平台
首页|期刊导航|中国机械工程|大底脚螺纹抽钉正向设计方法研究

大底脚螺纹抽钉正向设计方法研究OA北大核心CSTPCD

Study on Forward Design Process of Screw Type Blind Rivets

中文摘要英文摘要

通过理论分析、有限元仿真和实验验证的方式进行大底脚螺纹抽钉从1到0的反向应用基础研究,建立了安装过程中力的演变规律和平衡关系,得到安装性能(预紧力、鼓包直径和高度)与关键几何参数的匹配关系,开发了可实现自动建模和仿真计算的参数化求解模块.研究结果对提高大底脚螺纹抽钉的可靠性、经济效益,推动自主研发进程具有指导意义.

Through theoretical analysis,finite element simulation,and experimental verification,the reverse research from 1 to 0 on basic applications of screw type blind rivets was studied.The evo-lution and equilibrium of forces during installation processes were established.The relationships of in-stallation performance(preload,diameter and height of blind head)and key geometric parameters were obtained.And a parametric module was developed,which might achieve automatic modeling and simulation calculations.The results have guiding significance for enhancing connection reliability,im-proving economic benefits,and for promoting the processes of independent research and development of the screw type blind rivets.

丰佳铭;孙宇茵;何英;金万军;廖日东

北京理工大学机械与车辆学院,北京,100081中国航空工业标准件制造有限责任公司,贵阳,550014

大底脚螺纹抽钉正向设计方法扩口-失稳变形力的演变二次开发

screw type blind rivetforward design processflaring-wrinkling deformationforce evolutionsecondary development

《中国机械工程》 2024 (009)

1559-1566 / 8

中国航空发动机集团产学研合作项目(HF-ZL2019CXY021-2);国家自然科学基金重点项目(U2141217)

10.3969/j.issn.1004-132X.2024.09.005

评论