铸造2024，Vol.73Issue(9)：1280-1285,6.
精密铸造全自动真空沾浆桶设计与应用
Design and Application of Automatic Vacuum Slurry Tank in Investment Casting
白晓松 1张庆武 1张鹏伟 1王玫君1
作者信息
- 1. 中航工程集成设备有限公司,北京 102206
- 折叠
摘要
Abstract
Applying vacuum slurry dipping technology can solve the problem of bubble inclusion on the shell surface layer and greatly improve the surface quality of castings.This paper introduced the design and application of a kind of automatic vacuum slurry tank.At first,the performance parameters and technical requirements of the vacuum slurry tank were analyzed.Secondly,overall design of the vacuum slurry tank structure was completed,and the verifying calculation and optimization design were carried out for the stability of the vacuum vessel by using of ANSYS software.Finally,the prototype of the vacuum slurry tank was completed.The test shows that the prototype meets all of design objective requirements.The successful development of full-automatic vacuum slurry tank has achieved a breakthrough in domestic vacuum slurry dipping device which integrates flexibility,full automation and good vacuum performance.关键词
精密铸造/真空沾浆/结构设计/稳定性分析/有限元分析Key words
investment casting/vacuum slurry dipping/structural design/stability analysis/finite element analysis分类
矿业与冶金引用本文复制引用
白晓松,张庆武,张鹏伟,王玫君..精密铸造全自动真空沾浆桶设计与应用[J].铸造,2024,73(9):1280-1285,6.
