| 注册
首页|期刊导航|石油化工高等学校学报|PPC/PBAT复合材料的制备与性能研究

PPC/PBAT复合材料的制备与性能研究

杨可 张广翔 韩媛媛 赵桂艳

石油化工高等学校学报2024,Vol.37Issue(5):73-80,8.
石油化工高等学校学报2024,Vol.37Issue(5):73-80,8.DOI:10.12422/j.issn.1006-396X.2024.05.009

PPC/PBAT复合材料的制备与性能研究

Preparation and Performance Study of PPC/PBAT Composite Materials

杨可 1张广翔 1韩媛媛 1赵桂艳1

作者信息

  • 1. 辽宁石油化工大学 石油化工学院,辽宁 抚顺 113005
  • 折叠

摘要

Abstract

Blending poly(propylene carbonate)(PPC)with poly(adipate-butylene terephthalate)(PBAT)was involved in the preparation of PPC/PBAT composites.However,the limited compatibility between the two materials hinders the potential performance enhancement of PPC/PBAT composites.To improve the compatibility between PPC and PBAT,maleic anhydride(MA)as a polar monomer and 2,5-dimethyl-2,5-bis(tert-butyl peroxy)hexane(DHBP)as an initiator were chosen for grafting onto PBAT to produce copolymer grafted Maleic anhydride(PBAT-g-MA).The interplay between PPC and PBAT-g-MA,as well as its impact on the properties of the blend,was thoroughly examined.The elongation at break of the blend was found to gradually increase with higher mass fraction of PBAT-g-MA.The elongation at break of PPC/PBAT-g-MA blends increased from 21.2%to 68.1%(60 and 40 are the quality scores of PPC and PBAT-g-MA,respectively).Studies have shown that when the PBAT-g-MA content is lower than that of PPC,PBAT-g-MA functions as a uniformly dispersed phase within the PPC matrix.The anhydride group present in the material can effectively react with the end groups of PPC,thereby significantly enhancing compatibility between both phases and promoting stress transfer at interface layers to improve the mechanical properties of blends.

关键词

聚碳酸亚丙酯/聚己二酸-对苯二甲酸丁二醇酯/接枝改性/相容性

Key words

Poly(propylene carbonate)/Poly(butylene adipate-co-terephthalate)/Graft/Compatibility

分类

化学化工

引用本文复制引用

杨可,张广翔,韩媛媛,赵桂艳..PPC/PBAT复合材料的制备与性能研究[J].石油化工高等学校学报,2024,37(5):73-80,8.

基金项目

辽宁省教育厅科学技术研究项目(LJKMZ20220733,JYTMS20231437). (LJKMZ20220733,JYTMS20231437)

石油化工高等学校学报

OACSTPCD

1006-396X

访问量9
|
下载量0
段落导航相关论文