钻探工程2024，Vol.51Issue(6)：106-110,5.DOI:10.12143/j.ztgc.2024.06.013
深海取样岩心填充率自动监测系统研制及应用
Development and application of automatic monitoring system for core filling rate in deep-sea coring
摘要
Abstract
The development of automatic monitoring system for core filling rate is to fill the shortage of core condition monitoring in the coring process.The automatic monitoring system is composed of main controller,reserved temperature and pressure monitoring module,Hall sensor module,data storage module and serial debugging module.Among whcih,the principle of core status monitoring is based on Hall effect.The coring speed range of the system can be monitored in 0～30 mm/s,and the monitoring accuracy is about 1%.The system uses STM32 single-chip microcomputer,large-capacity memory,high-speed USB interface and so on,which has the functions of online debugging,programming and upgrading.The sea tests were made,and the results show that the system can automatically monitor the process of core penetration into the core tube at a water depth of 3000m(a hole bottom pressure of 0～35MPa),which can provide theoretical guidance for the selection of field sampler type and the optimization of working parameters of the sampler,and has a broad application prospect.关键词
岩心填充率/自动监测/霍尔效应/深海取样Key words
core filling rate/automatic monitoring/Hall effect/deep-sea coring分类
天文与地球科学引用本文复制引用
邵帅,苏波,王荣璟,张涛,卢春华..深海取样岩心填充率自动监测系统研制及应用[J].钻探工程,2024,51(6):106-110,5.基金项目
中国海洋石油集团有限公司攻关项目"深水钻孔取样贯入装置动态监测系统研究"(编号:G2117B-0712G112) （编号:G2117B-0712G112）
