| 注册
首页|期刊导航|纺织高校基础科学学报|荧光太阳能聚光聚酰胺熔纺纤维的制备及其性能

荧光太阳能聚光聚酰胺熔纺纤维的制备及其性能

段泽平 秦世华 郭诗盈 郭海洋 邓炳耀 李大伟 李昊轩 刘庆生

纺织高校基础科学学报2024,Vol.37Issue(5):40-47,73,9.
纺织高校基础科学学报2024,Vol.37Issue(5):40-47,73,9.DOI:10.13338/j.issn.1006-8341.2024.05.006

荧光太阳能聚光聚酰胺熔纺纤维的制备及其性能

Preparation and properties of melt-spun polyamide fiber for luminescent solar concentrators

段泽平 1秦世华 1郭诗盈 1郭海洋 1邓炳耀 1李大伟 1李昊轩 1刘庆生1

作者信息

  • 1. 江南大学纺织科学与工程学院,江苏无锡 214122
  • 折叠

摘要

Abstract

In order to obtain a new type of fiber-based luminescent solar concentrators(FLSCs)which can meet the requirements of textile processing by melt spinning method.FLSCs were pre-pared by melt spinning using biology base polyamide and high temperature fluorescent dyes.The effects of the type,concentration and drafting ratio of fluorescent dyes on their structure and properties were investigated.The results show that the FLSCs show a smooth surface and a uni-form evenness.The absorbance of the FLSCs increases with the increase of fluorescent dye con-centration.The excitation fluorescence intensity of FLSCs increases initially and then decreases.When the dye concentration is 0.2 wt%,the short-circuit current generated by the FLSCs cou-pling with polycrystalline solar panels reaches saturation,The current of introducing yellow fluo-rescent dye FLSCs can reach 10.2 μA.The absorbance and short-circuit current of 3 × drawn FLSCs are lower than those of as-spun FLSCs,while no significant change on the excitation fluo-rescence intensity of FLSCs.The tenacity values are all greater than 1.1 cN/dtex,which means the prepared FLSCs can meet the mechanical properties requirements of textile processing.

关键词

聚酰胺/熔融纺丝/牵伸倍数/荧光聚光纤维/光电性能

Key words

polyamide/melt spinning/draft ratio/FLSCs/photoelectric property

分类

轻工纺织

引用本文复制引用

段泽平,秦世华,郭诗盈,郭海洋,邓炳耀,李大伟,李昊轩,刘庆生..荧光太阳能聚光聚酰胺熔纺纤维的制备及其性能[J].纺织高校基础科学学报,2024,37(5):40-47,73,9.

基金项目

中国纺织工业联合会应用基础研究项目(J202008) (J202008)

宿迁市产业前瞻与共性关键技术项目(H202212) (H202212)

纺织高校基础科学学报

OACSTPCD

1006-8341

访问量0
|
下载量0
段落导航相关论文