| 注册
首页|期刊导航|空气动力学学报|大型结冰风洞冰形在线测量系统研制与应用

大型结冰风洞冰形在线测量系统研制与应用

左承林 马军 魏龙涛 孙冬宁 刘冠冕 程志航 易贤

空气动力学学报2024,Vol.42Issue(11):110-120,11.
空气动力学学报2024,Vol.42Issue(11):110-120,11.DOI:10.7638/kqdlxxb-2023.0213

大型结冰风洞冰形在线测量系统研制与应用

Investigation and application of ice accretion shape online measurement system for large-scale icing wind tunnel

左承林 1马军 1魏龙涛 1孙冬宁 1刘冠冕 2程志航 2易贤1

作者信息

  • 1. 中国空气动力研究与发展中心结冰与防除冰重点实验室,绵阳 621000
  • 2. 中航通飞华南飞机工业有限公司,珠海 519000
  • 折叠

摘要

Abstract

Ice accretion on aircraft surface degrades aircraft's aerodynamic performance and results in unpredictable disasters.Large-scale icing wind tunnels are essential for studying the growth process of the ice accretion on aircraft surfaces,the key to which is obtaining the precise ice shape.In the present paper,we developed a laser line scanning imaging-based system for online measuring the three-dimensional geometry of ice accretion in large-scale icing wind tunnels.This system has been successfully demonstrated in tests using an aircraft wing model at China Aerodynamics Research and Development Center's 3 m×2 m icing wind tunnel.Prior to scanning,a tridimensional calibration device was used to acquire all laser plane coefficients,which were later combined with camera calibration parameters to establish a mapping function between image and real-world dimensions.Using a combination of the Steger method and gradient barycenter calculation,we accurately located the laser lines on the intricate ice surface and calculated its three-dimensional coordinates,which were used to reconstruct the entire three-dimensional ice geometry.Experimental results indicate that our measurement system has a repeatability accuracy of 0.18 mm;it can effectively capture the three-dimensional geometry of rime,mixed and clear ice on the airfoil model's leading edge during the growth process.Our results agree well with commercial 3D scanners,with an overall standard deviation of 0.5 mm.

关键词

结冰风洞/三维冰形/在线测量/激光线扫描成像/标定/三维重建

Key words

icing wind tunnel/three-dimensional ice accretion shape/online measurement/laser line scanning imaging/calibration/three-dimensional reconstruction

分类

航空航天

引用本文复制引用

左承林,马军,魏龙涛,孙冬宁,刘冠冕,程志航,易贤..大型结冰风洞冰形在线测量系统研制与应用[J].空气动力学学报,2024,42(11):110-120,11.

基金项目

国家自然科学基金(52006235) (52006235)

空气动力学学报

OA北大核心CSTPCD

0258-1825

访问量4
|
下载量0
段落导航相关论文