纺织工程学报2024，Vol.2Issue(6)：33-40,8.
熔喷工艺参数对聚乳酸非织造材料力学性能的影响
Influence of melt-blown process parameters on the mechanical properties of polylactic acid nonwovens
摘要
Abstract
In order to improve the mechanical properties of polylactic acid melt-blown nonwovens,the effects of process parameters such as the left and right side blowing temperature,the suction speed under the net and the receiving distance on the transverse and longitudinal breaking strength and elongation at break were studied based on Box-Behnken response surface design experiment.The results showed that the transverse and longitu-dinal breaking strength of the material decreased with the increase of the receiving distance.When the suction speed was low,the transverse and longitudinal breaking strength of the material increased with the increase of the left and right side blowing temperature,and the transverse breaking strength of the material decreased with the increase of the receiving distance.The elongation at break of the material decreased with the increase of re-ceiving distance.When the suction wind speed decreased,the transverse and longitudinal fracture elongation of the material increased with the increase of the left and right side blowing temperature,and the longitudinal breaking elongation of the material decreased with the increase of the receiving distance.The receiving distance had the greatest influence on the mechanical properties of the material.The optimum PLA preparation process was as follows:the left and right side blowing temperature was 259.36℃,the suction speed under the net was 345.77 r·min-1,and the receiving distance was 170.55 cm.关键词
熔喷工艺参数/聚乳酸/响应面分析/断裂强力/断裂伸长率Key words
melt-blown process parameters/polylactic acid/response surface analysis/breaking strength/elonga-tion at break分类
轻工纺织引用本文复制引用
张寅江,王惠婷,徐朱宏,高颖俊,邹专勇,朱斐超,汪伦合,杨旭红..熔喷工艺参数对聚乳酸非织造材料力学性能的影响[J].纺织工程学报,2024,2(6):33-40,8.基金项目
国家自然科学基金项目(51903156) （51903156）
浙江省科技厅领雁研发攻关计划项目(2022C01SA691301) （2022C01SA691301）
中国纺织工业联合会科技指导性项目(2024029) （2024029）
湖北省重点实验室开发基金项目(STRZ202207) （STRZ202207）
绍兴文理学院-浙江大学绍兴研究院联合科研资助基金项目(2023LHLG008) （2023LHLG008）
国家级大学生创新创业训练计划项目(202310349040). （202310349040）
