爆炸与冲击2025，Vol.45Issue(1)：65-74,10.DOI:10.11883/bzycj-2024-0082
高空强爆炸X射线辐照铝靶板动响应的数值模拟
A dynamic response simulation of aluminum plate target induced by high-altitude nuclear detonation X-ray
余润洲 1张昆 1汤文辉1
作者信息
- 1. 国防科技大学理学院,湖南 长沙 410073
- 折叠
摘要
Abstract
When X-rays generated by high-altitude nuclear detonation irradiates on the shell structure of missile,blow-off impulse(BOI)and thermal shock waves generated may produce dynamic response and damage on it.The existing three one-dimensional theoretical models,Whitener,BBAY,and MBBAY,can only provide approximate BOI values and accurate results of peak pressure and other information are inaccessible.Solving this problem requires numerical calculations based on real physical laws.The numerical simulation program TSHOCK3D for X-ray thermal excitation wave is used to calculate the BOI and peak pressure to make a comparative analysis.An aluminum plate with a length and width of 4 mm and a thickness of 1 mm is set as the target for X-ray radiation.The range of the working conditions is 0.1-3.0 keV for the Planck's blackbody temperatures and radiant energy flux are in the range of 220-400 J/cm2.The results indicate that the TSHOCK3D can give the results effectively and reliably.The simulation results are consistent with the theoretical models mentioned above.The BOI and peak pressure are approximately linear with the energy flux,while the maximum value exist for different blackbody temperatures.关键词
X射线/汽化反冲冲量/热激波/TSHOCK3DKey words
X-ray/blow-off impulse/thermal shock wave/TSHOCK3D分类
力学引用本文复制引用
余润洲,张昆,汤文辉..高空强爆炸X射线辐照铝靶板动响应的数值模拟[J].爆炸与冲击,2025,45(1):65-74,10.
