弹道学报2024，Vol.36Issue(4)：39-47,9.DOI:10.12115/j.issn.1004-499X(2024)04-005
着靶攻角对12.7 mm穿燃弹侵彻陶瓷复合装甲板的影响
Study on the Effect of Attack Angle on 12.7 mm Armor-piercing Incendiary Projectile Penetrating Ceramic Composite Plate
冯立华 1张兴金 1谭小辉 1纪杨子燚2
作者信息
- 1. 陕西飞机工业有限责任公司,陕西汉中 723000
- 2. 南京理工大学机械工程学院,江苏南京 210094
- 折叠
摘要
Abstract
The penetration test of 12.7 mm armor-piercing incendiary ammunition on a certain type of ceramic composite armor plate structure was carried out.The limit penetration velocity of the projectile to the composite armor plate and the damage pattern of the target plate was obtained.The finite element model of the projectile penetration of ceramic composite armor plate was established based on the smoothed particle hydrodynamics method in LS-DYNA.The finite element model was verified by comparing the maximum penetration velocity of the projectile,damage patterns and perforation size on the front side of the ceramic plate,deformation and damage on the back side of the composite target plate obtained from the experiment and numerical simulation.Then,the effect of the attack angle on the dynamic response of the projectile and the target plate in the penetration process was simulated and analyzed.The results show that,the penetration ability of the projectile to the ceramic composite armor plate is enhanced due to the decreasing of contact area between the head of projectile and target when the attack angle increasing from 0° to 6°.With the attack angle further increasing,the penetration ability of the projectile penetration ability decreases.It is resulted from the interaction the tail of projectile with the unbroken ceramic outside the central crushing area of the ceramic plate after the projectile penetrates the ceramic target plate due to the large deflection angle of the projectile.The interaction consumes part of its kinetic energy and leads to the decrease of its penetration ability.The energy absorbed by the ceramic is approximately 5 times that of the composite material layer,indicating that the attack angle mainly affects the energy absorption of the ceramic plate and consequently influences the penetration of the target plate.关键词
陶瓷复合装甲/穿甲燃烧弹/攻角/侵彻Key words
ceramic composite armor plate/armor-piercing incendiary projectile/attack angle/penetration分类
军事科技引用本文复制引用
冯立华,张兴金,谭小辉,纪杨子燚..着靶攻角对12.7 mm穿燃弹侵彻陶瓷复合装甲板的影响[J].弹道学报,2024,36(4):39-47,9.
