| 注册
首页|期刊导航|湖南大学学报(自然科学版)|挖掘机多路阀加速寿命试验加载方式研究

挖掘机多路阀加速寿命试验加载方式研究

王同建 兰思威 陈晋市 杨飞 张淼淼 张卫东

湖南大学学报(自然科学版)2024,Vol.51Issue(12):30-37,8.
湖南大学学报(自然科学版)2024,Vol.51Issue(12):30-37,8.DOI:10.16339/j.cnki.hdxbzkb.2024248

挖掘机多路阀加速寿命试验加载方式研究

Research on Loading Way of Multi-way Valve Acceleration Life Testing of Excavators

王同建 1兰思威 1陈晋市 1杨飞 2张淼淼 1张卫东3

作者信息

  • 1. 吉林大学 机械与航空航天工程学院,吉林 长春 130022
  • 2. 林德液压(中国)有限公司,山东 潍坊 261000
  • 3. 天津工程机械研究院有限公司,天津 300409
  • 折叠

摘要

Abstract

To accurately measure the reliable life of the multi-way valve of the backhoe hydraulic excavator,two reliability accelerated life estimation test methods for the normal operation of the multi-way valve were proposed based on the measured load data of the excavator during excavation operation as well as the Archard wear equation.Taking the 20 t backhoe hydraulic excavator as the research object,the load data under the typical operating conditions of the hydraulic excavator are first collected,and 100 groups of typical excavation operation cycle data are extracted from the load data according to the pressure characteristics of the multi-way valve port during the operation of the excavator.To measure the reliable life of the normal operation of the multi-way valve in a short time,two accelerated life test methods of synchronous loading and simulated loading were proposed,where synchronous loading is the A/B port plugging,the rated flow rate of the main relief valve is input,and it is kept constant.In the process of continuous reversing,the rated pressure of the main relief valve is used to load the pressure of the multi-way valve,and the steady-state time of the valve core back to the median position is obtained by AMESim simulation and the pressure holding time of each valve port is determined by factors such as material deformation.Simulated loading means that each valve port is loaded following the action sequence of each valve port when the excavator performs a 90° rotation operation.Finally,the acceleration multipliers of the two acceleration tests are calculated using the Archard wear equation and combined with the actual working conditions of the multi-way valves.It concludes that the acceleration multipliers of synchronous loading are larger,while the simulated loading is closer to the actual working cycle.

关键词

多路阀/可靠性/寿命试验/Archard方程/载荷谱

Key words

multi-way valve/reliability/life test/Archard equation/load spectrum

分类

机械制造

引用本文复制引用

王同建,兰思威,陈晋市,杨飞,张淼淼,张卫东..挖掘机多路阀加速寿命试验加载方式研究[J].湖南大学学报(自然科学版),2024,51(12):30-37,8.

基金项目

国家重点研发计划资助项目(2018YFB2000902),National Key Research and Development Program of China(2018YFB2000902) (2018YFB2000902)

湖南大学学报(自然科学版)

OA北大核心CSTPCD

1674-2974

访问量0
|
下载量0
段落导航相关论文