福建冶金2025，Vol.54Issue(1)：46-51,6.
基于透射式放射源的钢水液面控制仪校准方法研究
Study on the Calibration Method of Liquid Steel Level Controller Based on Transmissive Radioactive Source
张树养 1刘小刚1
作者信息
- 1. 福建三钢闽光股份有限公司,福建 三明 365000
- 折叠
摘要
Abstract
The liquid steel level controller is the key quality control point to prevent spillage and breakout,and is an important technical means to ensure billet continuous casting production.This paper studies and analyzes the control principle,production situation and practical application of liquid steel level controller,identifies the metrological characteristics which have important influence on production,and puts forward a scientific calibration method so as to ensure accurate control.The calibrator and the automatic calibration software studied in this calibration method can improve the calibration accuracy and greatly reduce the labor intensity.The application of the calibration method can ensure the accuracy and reliability of the liquid steel level control instrument,promote the instrument manufacturers to improve the product quality,improve the instrument detection accuracy and thus greatly improve the level fluctuation control accuracy,It is of great significance to obtain good billet quality,improve continuous casting production efficiency and operation rate,and produce clean steel in iron and steel industry.关键词
钢水液面控制仪/计量特性/标准钢板/结晶器/校准/刻度Key words
liquid steel level controller/metering characteristics/standard steel plate/mold/calibration引用本文复制引用
张树养,刘小刚..基于透射式放射源的钢水液面控制仪校准方法研究[J].福建冶金,2025,54(1):46-51,6.
