农业装备与车辆工程2025，Vol.63Issue(1)：47-50,4.DOI:10.3969/j.issn.1673-3142.2025.01.008
拖拉机小锥齿轮轴调整垫片选取检测装置结构研究
Research on structure of inspection device for selecting adjusting gasket of tractor bevel gear shaft
姚瑶 1李燕君 1李风娥 1刘冰1
作者信息
- 1. 第一拖拉机股份有限公司 大拖公司,河南 洛阳 471039
- 折叠
摘要
Abstract
Due to the frequent development of new tractor products,the on-line automatic gasket selection device for the small bevel shaft adjusting gasket of the tractor trunk can not adapt to the assembly of a variety of new trial models.Therefore,according to the selection and assembly characteristics of the small bevel shaft adjusting gasket of the existing tractor trunk,a selection and detection device for the small bevel gear shaft adjusting gasket of the tractor trunk was designed.The device had a simple structure and was easy to operate.Based on the installation distance L7 of different models of bevel gear pairs,the measured distance L0 between the positioning block and the end face of the plug on the detection shaft assembly,and the fixture dimensions(L1,L2,L3),the actual thickness of the small cone installation distance adjustment gasket was calculated to reduce the development cost of new products and meet the requirements of tractor new product trial production.关键词
拖拉机/小锥安装距/检测装置Key words
tractor/installation distance of small cone/detecting device分类
机械制造引用本文复制引用
姚瑶,李燕君,李风娥,刘冰..拖拉机小锥齿轮轴调整垫片选取检测装置结构研究[J].农业装备与车辆工程,2025,63(1):47-50,4.
