合成材料老化与应用2024，Vol.53Issue(6)：62-65,4.
橡胶沥青应力吸收层性能研究
Study on the Performance of Stress Absorbing Layer of Rubber Asphalt
霍延敏 1位可可2
作者信息
- 1. 河南交通投资集团有限公司济洛西项目部,河南济源 454650
- 2. 河南省中工设计研究院集团股份有限公司,河南郑州 450000
- 折叠
摘要
Abstract
Using a combination of numerical simulation and in-house tests,the influence of rubberized asphalt stress absorption layer on the mechanical properties of asphalt pavement was studied,and the optimal amount of rubberized asphalt and the optimal full coverage rate of crushed stone were analyzed.The results show that the installation of a rubberized asphalt stress absorption layer on an asphalt pavement will increase the surface deflection and bottom shear stress of the asphalt layer,while reducing the bottom tensile stress.The layer thickness should not be set too large,and the optimal amount of rubberized asphalt is 2.2 kg/m2,while the optimal full coverage rate of crushed stone is 70％.关键词
橡胶沥青应力吸收层/力学性能/沥青最佳洒布量/碎石最佳满铺率Key words
rubber asphalt stress absorbing layer/mechanical properties/the best spreading amount of asphalt/optimum full coverage rate of gravel分类
交通工程引用本文复制引用
霍延敏,位可可..橡胶沥青应力吸收层性能研究[J].合成材料老化与应用,2024,53(6):62-65,4.
