| 注册
首页|期刊导航|塑料科技|新型PA66三元复合材料的制备及性能研究

新型PA66三元复合材料的制备及性能研究

贾志宁 闫艳红 郝彩哲 陶炜

塑料科技2025,Vol.53Issue(1):56-60,5.
塑料科技2025,Vol.53Issue(1):56-60,5.DOI:10.15925/j.cnki.issn1005-3360.2025.01.010

新型PA66三元复合材料的制备及性能研究

Preparation and Properties Study of New PA66 Ternary Composites

贾志宁 1闫艳红 2郝彩哲 1陶炜2

作者信息

  • 1. 河北石油职业技术大学河北省仪器仪表技术创新中心,河北承德 067000
  • 2. 燕山大学机械工程学院自润滑关节轴承共性技术航空科技重点实验室,河北秦皇岛 066004
  • 折叠

摘要

Abstract

PA66/GF/CF ternary composites,which were filled with short carbon fiber(CF)and short glass fiber(CF),with polyadiohexylenediamine(PA66)as the matrix,were prepared using the mass fraction of the filler as the influencing factor and the water absorption rate,hardness,compressive strength and tribological performance of the composites as the evaluation indicators.The results show that the mass fraction of fillers has a significant impact on the water absorption of PA66 composites,which decreases with the increase of CF mass fraction,and does not show a single trend with the change of GF mass fraction.The overall hardness of PA66 composites increases with the increase of GF mass fraction,while it shows a slow decrease followed by a rapid increase with the increase of CF mass fraction.The skeleton-like structure of the fibers in the system makes its load-bearing capacity larger,resulting in an increase in compressive strength with the increase of filler mass fraction.Tribological tests show that,taking the water absorption,hardness and compression strength into account,the PA66 composites with excellent performance is GF20CF15,which means that the GF filling mass fraction is 20%,the CF filling mass fraction is 15%,and the PA66 mass fraction is 65%.

关键词

PA66三元复合材料/吸水性能/硬度/压缩强度/摩擦学

Key words

PA66 ternary composites/Water absorption/Hardness/Compressive strength/Tribology

引用本文复制引用

贾志宁,闫艳红,郝彩哲,陶炜..新型PA66三元复合材料的制备及性能研究[J].塑料科技,2025,53(1):56-60,5.

基金项目

河北省科技计划(215676110H) (215676110H)

河北省自然科学基金(E2016411005) (E2016411005)

塑料科技

OA北大核心

1005-3360

访问量0
|
下载量0
段落导航相关论文