太赫兹科学与电子信息学报2025，Vol.23Issue(1)：1-5,11,6.DOI:10.11805/TKYDA2024399
基于准八木天线探针过渡的E波段倍频器模块
E-band multiplier module based on Quasi-Yagi antenna transition
罗蒸鸿 1高港 2周梓乔 2于伟华 1周明3
作者信息
- 1. 北京理工大学长三角研究院(嘉兴),浙江 嘉兴 314019||北京理工大学 集成电路与电子学院,北京 100081
- 2. 北京理工大学 集成电路与电子学院,北京 100081
- 3. 北京理工大学长三角研究院(嘉兴),浙江 嘉兴 314019
- 折叠
摘要
Abstract
A new design and fabrication method for an E-band frequency doubler module is introduced.The module utilizes a quartz probe in the form of a quasi-Yagi antenna to achieve efficient signal transition from the chip to the rectangular waveguide.To suppress the higher-order mode resonance generated in the packaged chip cavity,a pin-shaped electromagnetic bandgap structure is introduced to expand the operating bandwidth.To verify this method,the module is optimized through simulation,processed,and tested.The test results show that with an input power of 13 dBm,it is capable of outputting radio frequency signals with frequencies in the range of 60～80 GHz and power greater than 0 dBm.The test results match well with the on-chip test results of the chip,proving the feasibility of this method.关键词
E波段/封装/准八木天线/销钉型电磁带隙结构/二倍频器Key words
E-band/packaging/Quasi-Yagi antenna/Electromagnetic Band Gap(EBG)pin/frequency multiplier分类
电子信息工程引用本文复制引用
罗蒸鸿,高港,周梓乔,于伟华,周明..基于准八木天线探针过渡的E波段倍频器模块[J].太赫兹科学与电子信息学报,2025,23(1):1-5,11,6.
