| 注册
首页|期刊导航|中国塑料|动态加载条件下青贮PE膜的机械特性研究

动态加载条件下青贮PE膜的机械特性研究

高东明 魏丹丹 万其号

中国塑料2025,Vol.39Issue(1):48-56,9.
中国塑料2025,Vol.39Issue(1):48-56,9.DOI:10.19491/j.issn.1001-9278.2025.01.009

动态加载条件下青贮PE膜的机械特性研究

Study on mechanical properties of silage polyethylene film under dynamic loading conditions

高东明 1魏丹丹 1万其号2

作者信息

  • 1. 北京工商大学计算机与人工智能学院,北京 100048
  • 2. 中国农业科学院草原研究所,呼和浩特 010010
  • 折叠

摘要

Abstract

The current standards are difficult to measure the characteristics of silage polyethylene(PE)film under actual working conditions.In this study,uniaxial tensile tests at different tensile rates with a strain range within 200%and stress relaxation tests at different initial elongations were conducted on the PE film specimens in the machine direction(MD)and transverse direction(TD).The tensile test results indicated that there was a pronounced dependency on both stretching speed and direction in the stress-strain(σ-ε)profiles,and the films exhibited a secondary yielding phenomenon in both MD and TD orientations.With an increase in the tensile rate,there was a decrease observed in the elongation at the second yield.The first and second yield strengths in the MD direction showed a good linear mapping relationship with the logarithm of tensile rate(ln v).An increase in the tensile rate could improve the yield strength of the PE film.How-ever,the yield strength reduced the toughness of PE film after reaching a certain rate.Stress relaxation tests indicated that both the MD-and TD-oriented films presented a rapid decrease followed by a gradual reduction in stress across a range from a low initial stretch level(10%)to the high one(70%).The generalized seven-element Maxwell model could accurately describe the stress relaxation behavior of the PE film,which offered insights into its long-term stress re-laxation characteristics.The quantity of stress relaxation and rate of stress decay decreased with an increase in the stretch level.This indicated a reduction in the relaxation modulus as well as a more stable modulus during the slow stress decline phase.These findings suggest that to realize the optimal silage sealing,the PE films should balance stiffness with resil-ience to relaxation with an ideal stretch range of 50~70%during wrapping.

关键词

青贮PE膜/机械特性/拉伸速率/屈服伸长率/应力松弛

Key words

silage polyethylene film/mechanical characteristics/tensile rate/yield elongation/stress relaxation

分类

化学化工

引用本文复制引用

高东明,魏丹丹,万其号..动态加载条件下青贮PE膜的机械特性研究[J].中国塑料,2025,39(1):48-56,9.

基金项目

内蒙古自治区科技计划项目(2023YFDZ0024) (2023YFDZ0024)

中国塑料

OA北大核心

1001-9278

访问量0
|
下载量0
段落导航相关论文