哈尔滨工程大学学报2024，Vol.45Issue(12)：2312-2318,7.DOI:10.11990/jheu.202307021
containmentFOAM中蒸气冷凝模型的修正与确认
Correction and validation of the steam condensation model in containmentFOAM
摘要
Abstract
The solver containmentFOAM,based on the open-source computational fluid dynamics program Open-FOAM,was tested to examine the heat transfer process of steam(containing air)condensation under accident con-ditions.The steam condensation heat transfer model was corrected,and COPAIN and COAST test benches were simulated to compare containmentFOAM and its condensation heat transfer model with the commercial CFD program Star-CCM+.Results show that the condensation heat transfer model in containmentFOAM is highly accurate when simulating the condensation process on flat surfaces.However,for condensation on round tube surfaces,a suction effect correction is required.ContainmentFOAM demonstrates lower grid sensitivity,higher simulation efficiency,and higher simulation accuracy than Star-CCM+.The heat transfer process of fluid containing non-condensing gases in containment can be accurately and efficiently simulated by modifying the condensation model in containment-FOAM.关键词
OpenFOAM/Star-CCM+/COPAIN/冷凝与组分输运/蒸气冷凝/扩散边界层模型/抽吸效应/程序确认Key words
OpenFOAM/Star-CCM+/COPAIN/condensation and species transport/steam condensation/diffusion boundary layer model/suction effect/code validation分类
能源科技引用本文复制引用
李龚霖,王辉,周书航,边浩志,丁铭..containmentFOAM中蒸气冷凝模型的修正与确认[J].哈尔滨工程大学学报,2024,45(12):2312-2318,7.基金项目
中核集团领创科研项目(KY90200220006). （KY90200220006）
