理化检验-物理分册2025，Vol.61Issue(1)：10-14,20,6.DOI:10.11973/lhjy-wl240254
低牌号无取向电工钢B坯增碳的影响因素
Influencing factors of carbon pick-up of low grade non-oriented electrical steel B billet
朱鹏宏 1高兴健 1王思琴 1雷志亮1
作者信息
- 1. 宝钢湛江钢铁有限公司,湛江 524072
- 折叠
摘要
Abstract
The influence of different kinds of mold fluxes on the carbon pick-up of molten steel in non-oriented electrical steel was studied.Through comparative analysis,it was found that the composition and physical and chemical properties of casting powder were one of the main factors determining the carbon pick-up of molten steel.Through continuous sampling of the casting length of the first slab(B slab),the main range and change trend of the carbon pick-up of the slab were found.The influence of the pouring process on the carbon pick-up of the casting powder was analyzed by means of fixed variables.The results show that reducing the content of free carbon in the casting powder,appropriately reducing the melting point of the casting powder,increasing the viscosity of the casting powder,and ensuring the casting speed and superheat could control the carbon pick-up of the casting powder.In addition,through experimental analysis and production verification,other key factors that affected the carbon pick-up of slab at the initial stage of casting were put forward,and suggestions for improvement were put forward finally.关键词
无取向电工钢/B坯/增碳/保护渣Key words
non-oriented electrical steel/B billet/carbonization/casting powder分类
通用工业技术引用本文复制引用
朱鹏宏,高兴健,王思琴,雷志亮..低牌号无取向电工钢B坯增碳的影响因素[J].理化检验-物理分册,2025,61(1):10-14,20,6.
