| 注册
首页|期刊导航|石油化工|Pt/NiAl层状双金属氢氧化物载体催化剂上十氢萘产氢性能

Pt/NiAl层状双金属氢氧化物载体催化剂上十氢萘产氢性能

李文达 王凤丽 赵俊哲 陈杰玉 刘清龙 罗明生

石油化工2025,Vol.54Issue(2):151-160,10.
石油化工2025,Vol.54Issue(2):151-160,10.DOI:10.3969/j.issn.1000-8144.2025.02.001

Pt/NiAl层状双金属氢氧化物载体催化剂上十氢萘产氢性能

Hydrogen production performance of decalin over Pt/NiAl layered double hydroxide-based supported catalyst

李文达 1王凤丽 2赵俊哲 2陈杰玉 1刘清龙 1罗明生1

作者信息

  • 1. 北京石油化工学院 新材料与化工学院,北京 102617||北京石油化工学院 燃料清洁化及高效催化减排技术北京市重点实验室,北京 102617
  • 2. 北京石油化工学院 新材料与化工学院,北京 102617
  • 折叠

摘要

Abstract

NiAl layered double hydroxides(NiAl-LDH)were prepared by the hydrothermal method and co-precipitation method.The NiAl-LDH carrier(NiAl-LDO)were obtained through the calcination,and Pt/NiAl-LDO catalysts were prepared by using the impregnation method.The physicochemical properties of the catalysts were characterized by XRD,N2 adsorption-desorption,and TEM,and the hydrogen production performance of decalin over the catalysts was investigated.The experimental results indicate that the hydrothermal method is more suitable for forming the layered structure of NiAl-LDH,which are conducive to the dispersion of active components and the contact between reactants and catalysts.An appropriate amount of Ni on the carrier contributes to the stability of Pt particles,but excessive Pt loading results in the obvious enlargement of Pt particles.When the Ni/Al molar ratio is 4∶1,and the Pt loading is 1%(w),the catalyst exhibits the highest catalytic activity.The hydrogen production amount per gram of Pt reaches 4.47 mol under atmospheric pressure at 260℃for 20 min.

关键词

液相有机氢载体/层状双金属氢氧化物/十氢萘脱氢/Pt基催化剂

Key words

liquid-phase organic hydrogen carrier/layered double hydroxide/decalin dehydrogenation/Pt-based catalyst

分类

化学化工

引用本文复制引用

李文达,王凤丽,赵俊哲,陈杰玉,刘清龙,罗明生..Pt/NiAl层状双金属氢氧化物载体催化剂上十氢萘产氢性能[J].石油化工,2025,54(2):151-160,10.

基金项目

国家自然科学基金青年项目(22202013) (22202013)

北京市教委科技计划一般项目(KM202110017010) (KM202110017010)

大学生研究训练[URT]计划项目(2024J00265). (2024J00265)

石油化工

OA北大核心

1000-8144

访问量0
|
下载量0
段落导航相关论文