| 注册
首页|期刊导航|家电科技|缔合型碱溶胀增稠剂对水性塑胶涂料性能影响研究

缔合型碱溶胀增稠剂对水性塑胶涂料性能影响研究

廖勇 钟明生 倪雪辉

家电科技2024,Vol.6Issue(6):42-45,4.
家电科技2024,Vol.6Issue(6):42-45,4.DOI:10.19784/j.cnki.issn1672-0172.2024.06.007

缔合型碱溶胀增稠剂对水性塑胶涂料性能影响研究

Study on effect of associative alkali swelling thickener on performance of waterborne plastic coatings

廖勇 1钟明生 1倪雪辉1

作者信息

  • 1. 珠海格力电器股份有限公司 广东 珠海 519070
  • 折叠

摘要

Abstract

The thickening effect of polyurethane thickener was not good in the water-based coating system with higher content of film forming additives,but the thickening effect of alkali swelling thickener was good in this system.At present,the research of alkali swelling thickeners mainly focused on the synthesis and properties of macromolecules study,but there were few public reports on their application in water-based coatings.The application of alkali swelling thickener in single-component waterborne plastic coatings was studied,and the effects of the amount of thickener on the viscosity,storage settlement,construction property,gloss and water resistance of the coating were discussed.The results show that the viscosity of waterborne coatings was increased from 38.3 KU to 134 KU,and the settlement degree was increased from 2 to 10 with the increase of the dosage of thickener.When the dosage is 0.8%~1.1%,the construction performance is better;Glossiness showed a trend of first increase and then decrease with the increase of the thickener.When the amount of the thickener was 0.8%,glossiness was up to 78.2 GU.Coatings boiling resistance with the increase of the thickener and then reduced,when the amount of more than 1.1%,bubbler was coming out after coatings boiled and coatings adhesion was abnormal.

关键词

水性涂料/增稠剂/用量/粘度/光泽度

Key words

Waterborne coatings/Thickener/Dosage/Viscosity/Glossiness

分类

信息技术与安全科学

引用本文复制引用

廖勇,钟明生,倪雪辉..缔合型碱溶胀增稠剂对水性塑胶涂料性能影响研究[J].家电科技,2024,6(6):42-45,4.

家电科技

1672-0172

访问量7
|
下载量0
段落导航相关论文