粉末冶金技术2025，Vol.43Issue(1)：61-70,10.DOI:10.19591/j.cnki.cn11-1974/tf.2023050006
直接氮化法制备高品质氮化硅陶瓷粉体
High-quality silicon nitride ceramic powders by direct nitriding method
摘要
Abstract
High-quality silicon nitride ceramic powders were prepared by direct nitriding method with silicon powders as the raw materials.The effects of nitriding temperature,heating rate,particle size of silicon powders,and dosage of diluent on the silicon nitride ceramic powders were studied.In the results,when the reaction temperature is 1400℃and the heating rate is controlled at 5℃·min-1 during 1100～1400℃,the raw silicon powders without the Si3N4 diluent are completely nitrided,the spherical silicon nitride materials with the uniform particle size(396～458 nm)and good dispersion are prepared,and the mass fraction of the α phase is 95.02%.The results show that,with the increase of nitriding temperature,the direct nitriding reaction of silicon powders shows an obvious stage.At the same reaction time,the best nitriding temperature is 1400℃,too high or too low reaction temperature could affect the competitive relationship between the transition from α-Si3N4 to β-Si3N4 at the silicon powder interface and the internal nitriding reaction,affecting the content of α-Si3N4.The heating rate is the key factor to control the reaction process,and the optimal heating rate is 5℃·min-1.When the heating rate is too fast or too slow,the transformation degree of silicon nitride from α phase to β phase exceeds the internal reaction degree,and the silicon powder reaction is incomplete.The suitable milling time can reduce the particle size of raw silicon powders,increase the specific surface area,and increase the contact area between silicon powders and nitrogen,which can improve the nitriding rate and increase the mass fraction of α-Si3N4.The addition of α-Si3N4 diluent can reduce the oxygen content and nitriding temperature of silicon powders,accelerate the nitriding process,and promote the formation of α-Si3N4 in the product.It can also absorb the additional heat released by the reaction between silicon and nitrogen,and mainly plays the role of heating body in the direct nitriding reaction of silicon powders.关键词
氮化硅/直接氮化法/陶瓷粉体/升温速率/α-Si3N4Key words
silicon nitride/direct nitriding method/ceramic powders/heating rate/α-Si3N4分类
冶金工业引用本文复制引用
赵丽艳,刘耀耀,杨静思,韩江则,李昆杰,赵瑞红,赵佳赛..直接氮化法制备高品质氮化硅陶瓷粉体[J].粉末冶金技术,2025,43(1):61-70,10.基金项目
河北省高等学校科学技术研究重点项目(ZD2021320) （ZD2021320）
