金属加工（热加工）Issue(3)：106-109,4.
1Cr11Ni2W2MoV不锈钢渗氮表面磨削后点状剥落问题研究
Research on the problem of point-like peeling on the nitride surface of 1Cr11Ni2W2MoV material after grinding
江珍艳 1谢善 1张诗佳 1黄文东 1张克疆1
作者信息
- 1. 成都航利航空科技有限责任公司 四川成都 611900
- 折叠
摘要
Abstract
After parts of 1Cr11Ni2W2MoV stainless steel were nitrided,point-like peeling was found on the nitrided surface after grinding.This paper studied the morphology and distribution of point-like peeling,the microstructure and hardness of the nitrided layer,and explored the reasons for the point-like peeling after grinding the nitrided layer.It also proposed a solution to the problem.关键词
渗氮/点状剥落/裂纹Key words
nitride/spotting debris/crack引用本文复制引用
江珍艳,谢善,张诗佳,黄文东,张克疆..1Cr11Ni2W2MoV不锈钢渗氮表面磨削后点状剥落问题研究[J].金属加工（热加工）,2025,(3):106-109,4.
