| 注册
首页|期刊导航|机电工程技术|一种磁悬转子-轴承系统的动力学分析

一种磁悬转子-轴承系统的动力学分析

丁建刚 郝守忠 苏金胜

机电工程技术2025,Vol.54Issue(4):128-130,196,4.
机电工程技术2025,Vol.54Issue(4):128-130,196,4.DOI:10.3969/j.issn.1009-9492.2025.04.022

一种磁悬转子-轴承系统的动力学分析

Dynamic Analysis of a Magnetically Suspended Rotor-bearing System

丁建刚 1郝守忠 1苏金胜1

作者信息

  • 1. 陕西榆林能源集团煤炭进出口有限公司,陕西榆林 719000
  • 折叠

摘要

Abstract

Taking the magnetic levitation spinning cup rotor bearing system applied to air flow spinning as an example,the dynamic model of maglev spinning cup is established.Based on Riccati transfer matrix method,the third order critical speed of the rotor when the bearing stiffness is 5×106 N/m and the change of the critical speed with the bearing stiffness are calculated and analyzed.Based on ANSYS13.0,the dynamic simulation analysis of the spinning cup rotor-bearing system above is carried out.The simulation results are compared with those calculated by Riccati transfer matrix method,and the relative error is less than 5%.By means of HP35670A frequency response analyzer,the modal tests of spinning cup rotor in free state and suspension state are carried out,and the natural frequencies of rotor in two states are measured.The high speed test of the whole rotor-bearing system is carried out to analyze the rotor displacement at the maglev bearing at different speed,so as to further verify the theoretical calculation and simulation analysis results.The results show that the established rotor-bearing system dynamics model is reasonable and has certain reference significance for the design and analysis of flexible rotors.

关键词

磁悬浮纺杯转子/Riccati传递矩阵法/有限元法/试验模态分析

Key words

maglev spinning cup rotor/Riccati transfer matrix method/finite element method/experimental modal analysis

分类

机械制造

引用本文复制引用

丁建刚,郝守忠,苏金胜..一种磁悬转子-轴承系统的动力学分析[J].机电工程技术,2025,54(4):128-130,196,4.

机电工程技术

1009-9492

访问量6
|
下载量0
段落导航相关论文