农机化研究2025，Vol.47Issue(5)：180-185,6.DOI:10.13427/j.issn.1003-188X.2025.05.026
3D打印高分子材料扶蔗器的设计与试验
Design and Experimental of 3D Printing Polymer Material Sugarcane Lifter
摘要
Abstract
In order to explore the effect of sugarcane lifting,a new type sugarcane lifter was designed with 3D printing technology,adding polymer material and friction coefficient factor.Through orthogonal test and single factor test,the in-fluence law of sugarcane lifting process was proved.The results showed that:The speed of sugarcane lifter had the grea-test influence on the lifting effect of sugarcane,followed by roller diameter.The best scheme was PETG for material,friction coefficient 0.65,diameter 150 mm,pitch 160 mm,cone angle 18°,forward speed 0.36 m/s and speed 150 r/min.The lifting time was 3.3-6 s,and the lifting time was stable.Efficient operations can be achieved.关键词
扶蔗器/高分子工程塑料/滑动摩擦/滚动摩擦/螺距/扶起时间Key words
sugarcane lifter/polymer engineering plastics/sliding friction/rolling friction/pitch/lifting time分类
农业科技引用本文复制引用
雷敏娟,宋春华,区颖刚,余平祥..3D打印高分子材料扶蔗器的设计与试验[J].农机化研究,2025,47(5):180-185,6.基金项目
广东省科技计划项目(2007A02303000102) （2007A02303000102）
大学生科技创新大赛项目(GDCP-ZX-2022-024-N2) （GDCP-ZX-2022-024-N2）
