| 注册
首页|期刊导航|强激光与粒子束|短脉冲高产额中子发生器驱动电源研制

短脉冲高产额中子发生器驱动电源研制

董攀 王韬 李杰 刘平 何佳龙 叶龙建

强激光与粒子束2025,Vol.37Issue(3):13-17,5.
强激光与粒子束2025,Vol.37Issue(3):13-17,5.DOI:10.11884/HPLPB202537.240409

短脉冲高产额中子发生器驱动电源研制

Development of driving power supply for short pulse high yield neutron generator

董攀 1王韬 1李杰 1刘平 1何佳龙 1叶龙建1

作者信息

  • 1. 中国工程物理研究院流体物理研究所,四川 绵阳 621900
  • 折叠

摘要

Abstract

Vacuum arc neutron tube is a neutron source with high pulse neutron yield.It is widely used in oil logging,element activation analysis and other fields.One of the typical characteristics of vacuum arc neutron tube is large discharge arc current and short pulse width.A set of vacuum arc discharge and extraction power supply with large current is developed,including trigger module,main arc module and extraction module.The trigger module uses LRC discharge mode,and the peak output voltage is 5 kV.The arc module uses LRCD half-cycle discharge mode to generate the main arc current.The peak current is 600 A,and the half-height width is about 0.5 μs.The extraction module uses a multi-voltage rectifier circuit to rectify AC high-voltage into the required high-voltage DC,with an output voltage of 120 kV and a load of 2 A.The simulation model is established according to the design scheme,and the simulation results show that the power supply can output the set electrical parameters well.Finally,a high-current vacuum arc discharge and extraction power supply is fabricated.The test results show that the output parameters of the power supply are consistent with the design values,and the power supply can be used to drive a vacuum arc neutron tube.

关键词

真空弧放电/大电流/LRC脉冲放电/LRCD放电/倍压电路

Key words

vacuum arc discharge/high current/LRC pulse discharge/LRCD discharge/Voltage doubling circuit

分类

信息技术与安全科学

引用本文复制引用

董攀,王韬,李杰,刘平,何佳龙,叶龙建..短脉冲高产额中子发生器驱动电源研制[J].强激光与粒子束,2025,37(3):13-17,5.

基金项目

国家自然科学基金项目(11975217) (11975217)

强激光与粒子束

OA北大核心

1001-4322

访问量2
|
下载量0
段落导航相关论文