| 注册
首页|期刊导航|强激光与粒子束|大功率重复频率高电压脉冲充电电源研制

大功率重复频率高电压脉冲充电电源研制

甘延青 罗光耀 李飞 张北镇 李春霞 王淦平 金晓 宋法伦

强激光与粒子束2025,Vol.37Issue(3):18-25,8.
强激光与粒子束2025,Vol.37Issue(3):18-25,8.DOI:10.11884/HPLPB202537.240377

大功率重复频率高电压脉冲充电电源研制

Development of high power repetition-rate high voltage pulse charging power supply

甘延青 1罗光耀 1李飞 1张北镇 1李春霞 1王淦平 1金晓 1宋法伦1

作者信息

  • 1. 中国工程物理研究院应用电子学研究所先进激光与高功率微波全国重点实验室,四川 绵阳 621900
  • 折叠

摘要

Abstract

In view of the application requirements of the repetitive Marx-type pulse power source,a technology combining solid-state modulator and pulse transformer inductive adder was adopted to conduct research on high-power repetition-rate and high-voltage pulse charging power supply technology.The constant current charging technology based on BUCK-BOOST topology circuit was analyzed,and designs of key components such as high-voltage pulse transformer,pulse modulation module,BUCK-BOOST charging module,and control unit were provided.Finally a high-power repetitive pulse charging power supply prototype was developed.The prototype design specifications include a maximum output average power of 250 kW and a maximum repetition rate of 100 Hz.Charging tests were conducted on a 0.5 μF capacitive load,and an output pulse with a voltage of about 100 kV and a pulse rise time of about 300 μs was obtained.The pulse charging power supply adopts the design concept of multi module parallel connection in the primary design of the pulse transformer,which reduces the device volume and high voltage insulation risk.Under the conditions of high output power and high voltage,it achieves compact and modular design.

关键词

脉冲充电电源/BUCK-BOOST电路/脉冲功率技术/重频充电

Key words

pulse charging power supply/BUCK-BOOST circuit/pulse power technology/repetitive charging

分类

动力与电气工程

引用本文复制引用

甘延青,罗光耀,李飞,张北镇,李春霞,王淦平,金晓,宋法伦..大功率重复频率高电压脉冲充电电源研制[J].强激光与粒子束,2025,37(3):18-25,8.

基金项目

国家自然科学基金面上项目(12375205) (12375205)

高功率微波技术重点实验室基金项目(2023-WBSYS-02) (2023-WBSYS-02)

强激光与粒子束

OA北大核心

1001-4322

访问量0
|
下载量0
段落导航相关论文