强激光与粒子束2025，Vol.37Issue(3)：26-30,5.DOI:10.11884/HPLPB202537.240376
采用半导体开关的重频Marx型长脉冲高压电源
Repetitive frequency high voltage long pulse power supply based on Marx topology with semiconductor switch
摘要
Abstract
To meet the demand of modulator power supplies,such as klystrons with output pulses of up to milliseconds,this article describes a long pulse high-voltage pulse power supply based on the Marx circuit.It uses solid-state semiconductor switches as the main discharge switches.Introducing independent charging semiconductor switches at each stage of the Marx units,it solves the limitation of Marx structures that use resistors to charge energy storage capacitors and cannot operate at high repetition rates.In addition,adding an auxiliary power supply to power the driving circuit of each stage's Marx unit semiconductor switch,it can output long pulses of up to 1ms or more when triggered by optical fibers.The verification device designed using this Marx circuit has 6 basic charging and discharging units,which can output long pulses with an amplitude of-10 kV/1 A and a width of 1 ms.When outputting short pulses,the maximum output frequency exceeds 50 kHz.关键词
高压脉冲电源/半导体开关/Marx结构/长脉冲Key words
high voltage pulse power supply/semiconductor switch/Marx topology/long pulse分类
动力与电气工程引用本文复制引用
丁明军,董攀,李杰,冯宗明..采用半导体开关的重频Marx型长脉冲高压电源[J].强激光与粒子束,2025,37(3):26-30,5.基金项目
国家自然科学基金项目(11975217) （11975217）
