| 注册
首页|期刊导航|工程科学与技术|基于灰色关联分析下深度学习盾构姿态预测模型

基于灰色关联分析下深度学习盾构姿态预测模型

满轲 柳宗旭 商艳 宋志飞 刘晓丽 苏宝

工程科学与技术2025,Vol.57Issue(2):203-213,11.
工程科学与技术2025,Vol.57Issue(2):203-213,11.DOI:10.12454/j.jsuese.202300377

基于灰色关联分析下深度学习盾构姿态预测模型

Deep Learning Shield Attitude Prediction Model Based on Grey Correlation Analysis

满轲 1柳宗旭 2商艳 3宋志飞 1刘晓丽 4苏宝5

作者信息

  • 1. 北方工业大学 土木工程学院,北京 100144
  • 2. 北方工业大学 土木工程学院,北京 100144||鄂尔多斯应用技术学院 土木工程系,内蒙古自治区 鄂尔多斯 107020
  • 3. 鄂尔多斯应用技术学院 土木工程系,内蒙古自治区 鄂尔多斯 107020
  • 4. 清华大学 水圈科学与水利工程国家重点实验室,北京 100084
  • 5. 广东珠三角城际轨道交通有限公司,广东 广州 510335
  • 折叠

摘要

Abstract

Objective A stacking ensemble prediction model based on long short-term memory(LSTM)and support vector regression(SVR)is proposed to address the issue of shield attitude deviation from the tunnel design axis. Methods The grey correlation analysis was employed to remove the rolling angle parameters with low grey correlation and then denoise them us-ing discrete wavelet transform(DWT).The DWT-LSTM-SVR stacking ensemble prediction model was obtained by optimally weighting the pro-cessed data after prediction by two single models separately.The cutter horizontal displacement,shield tail horizontal displacement,cutter vertic-al displacement,and shield tail vertical displacement were used as the output variables of the prediction model.In addition,22 tunneling paramet-ers,such as jack pressure,cutterhead torque,cutterhead speed,tunneling speed,pitch angle,primary jack stroke,and soil chamber pressure,along with five stratigraphic parameters,including natural unit weight,dry density,and specific gravity,were used as input variables.The DWT-LSTM-SVR model was applied to the A3 bidding section of the water resources allocation project in the Pearl River Delta.A total of 410 datasets were collected from the A3 bidding section.These 410 sample datasets were divided into a training set and a test set in a 9:1 ratio.The data from rings 968~1 336 formed the training set for the combined model,while the data from rings 1 337~1 377 constituted the test set. Results and Discussions The results showed that the errors between the predicted and actual values of the cutter horizontal displacement,shield tail horizontal displacement,cutter vertical displacement,and shield tail vertical displacement shield attitude parameters of the DWT-LSTM-SVR model were smaller than those of the DWT-LSTM model,DWT-SVR model,and AWT-LSTM-SVR model.This finding indicated that the model effectively combined the single models and that eliminating parameters with low correlation to the cutter horizontal displacement,shield tail horizontal displacement,cutter vertical displacement,and shield tail vertical displacement shield attitude parameters improved the model's prediction accuracy.In addition,the evaluation metrics of the DWT-LSTM-SVR model met the construction error requirements,with the best prediction achieved for the shield tail displacement values.The MAPE of the cutter horizontal displacement was 0.061,the MAPE of the cutter vertical displacement was 0.066,the MAPE of the shield tail horizontal displacement was 0.028,and the MAPE of the shield tail vertical displace-ment was 0.011.The R2 of the cutter horizontal displacement was 0.996,the R2 of the cutter vertical displacement was 0.960,the R2 of the shield tail horizontal displacement was 0.986,and the R2 of the shield tail vertical displacement was 0.985.These results indicated that the combined DWT-LSTM-SVR prediction model met the model design requirements.Finally,different datasets were established to analyze the sensitivity of data quantity to the prediction accuracy of the stacking ensemble model.It was found that the greater the data quantity,the higher the prediction accuracy of the stacking ensemble model.As the number of datasets decreased,the prediction results of the DWT-LSTM-SVR model began to show large deviations,especially in the last 10 rings. Conclusions The results indicated that the model's prediction for the first 15 rings is less sensitive to changes in the dataset,whereas the predic-tion for the last 10 rings is more sensitive to dataset variations.The DWT-LSTM-SVR model can serve as a reference for the advance adjustment of other shield attitudes.

关键词

盾构姿态/灰色关联度/深度学习/堆叠集成预测模型/误差预测

Key words

shield attitude/gray correlation/deep learning/stacking ensemble prediction model/error prediction

分类

交通工程

引用本文复制引用

满轲,柳宗旭,商艳,宋志飞,刘晓丽,苏宝..基于灰色关联分析下深度学习盾构姿态预测模型[J].工程科学与技术,2025,57(2):203-213,11.

基金项目

国家重点研发计划项目(2018YFC1504801 ()

2018YFC1504902) ()

国家自然科学基金项目(51522903 ()

51774184) ()

工程科学与技术

OA北大核心

2096-3246

访问量0
|
下载量0
段落导航相关论文