世界有色金属Issue(2)：148-150,3.
矿山工程中全站仪水平仪校准方法研究
Research on the calibration method of total station level in mining engineering
陈积佳 1吴炼 1段磊 1郭龙文1
作者信息
- 1. 甘肃省测绘产品质量监督检验站,甘肃 兰州 730000
- 折叠
摘要
Abstract
The total station,with its high accuracy and integrated design,is widely used in mining engineering surveying.Its stability partially depends on the condition of its level.This study explores the calibration method of total station level based on the actual engineering and usage needs of total station.Several common calibration methods such as comparison method,calculation method,and physical benchmarking method have been applied,and their applicability and accuracy have been compared and analyzed.The experimental results show that the comparison and calculation methods outperform the physical benchmarking method in terms of accuracy and efficiency.The application of calibration technology derived from research to engineering measurement practice has verified the practicality and efficiency of this technology.This study is of practical importance in improving the application effect of total stations in mining engineering and reducing measurement errors caused by level errors.关键词
全站仪/水平仪校准/矿山工程/测量误差/校准技术Key words
total station/Level calibration/Mining engineering/Measurement error/Calibration techniques分类
矿业与冶金引用本文复制引用
陈积佳,吴炼,段磊,郭龙文..矿山工程中全站仪水平仪校准方法研究[J].世界有色金属,2025,(2):148-150,3.
