| 注册
首页|期刊导航|日用化学工业(中英文)|W-SN交联剂的合成及其交联性能研究

W-SN交联剂的合成及其交联性能研究

程海兵 张勇 孙磊 李唯佳 陈志 唐聪明 常丽

日用化学工业(中英文)2025,Vol.55Issue(3):279-285,7.
日用化学工业(中英文)2025,Vol.55Issue(3):279-285,7.DOI:10.3969/j.issn.2097-2806.2025.03.002

W-SN交联剂的合成及其交联性能研究

Synthesis and crosslinking properties of W-SN crosslinking agent

程海兵 1张勇 2孙磊 1李唯佳 1陈志 1唐聪明 1常丽1

作者信息

  • 1. 重庆理工大学 化学化工学院,重庆 400054
  • 2. 重庆理工大学 化学化工学院,重庆 400054||西南石油大学 化学化工学院,四川 成都 610500
  • 折叠

摘要

Abstract

Fracturing is an important stimulation means for low-permeability oil reservoirs to increase their productivity.The normal operation of hydraulic fracturing largely depends on whether the fracturing fluid has excellent heat and shear resistance which in turn depends on the crosslinking agent.In this work,melamine,sodium tetraborate,and zirconium oxychloride were used as raw materials to synthesize a new W-SN crosslinking agent through"one-step method".Under laboratory conditions,the performance of the fracturing fluid used with this crosslinking agent was evaluated.By study of the preparation process of W-SN crosslinking agent,the optimized synthesis conditions were obtained as follows:5wt%zirconium oxychloride,1wt%melamine,2.5wt%sodium tetraborate,pH of 0.5,temperature of 90℃,and reaction time of 4 hours.The optimized conditions for gelation with partially hydrolyzed polyacrylamide(HPAM)were as follows:crosslinking time,25 minutes;mass ratio of HPAM to W-SN,100∶2.5.Both W-SN crosslinker and the HPAM gel show improved salt tolerance and thermal stability,satisfying the practical requirements of hydraulic fracturing operation.

关键词

压裂液/有机硼锆交联剂/耐温抗剪切/合成

Key words

fracturing fluid/organic boron zirconium crosslinking agent/thermal stability and shear resistance/synthesis

分类

化学化工

引用本文复制引用

程海兵,张勇,孙磊,李唯佳,陈志,唐聪明,常丽..W-SN交联剂的合成及其交联性能研究[J].日用化学工业(中英文),2025,55(3):279-285,7.

基金项目

重庆市自然科学基金面上项目(cstc2019jcyj-msxm0913) (cstc2019jcyj-msxm0913)

重庆理工大学研究生创新项目(ycx2018254) (ycx2018254)

日用化学工业(中英文)

OA北大核心

1001-1803

访问量3
|
下载量0
段落导航相关论文