| 注册
首页|期刊导航|材料科学与工程学报|多孔氧化锰的脱硫性能及其反应动力学

多孔氧化锰的脱硫性能及其反应动力学

汪昭玮 马继 李兴

材料科学与工程学报2025,Vol.43Issue(1):55-61,7.
材料科学与工程学报2025,Vol.43Issue(1):55-61,7.DOI:10.14136/j.cnki.issn1673-2812.2025.01.008

多孔氧化锰的脱硫性能及其反应动力学

Desulfurization Performance and Reaction Kinetics of Porous Manganese Oxide

汪昭玮 1马继 1李兴2

作者信息

  • 1. 广州小鹏汽车科技有限公司,广东 广州 510640
  • 2. 中国科学院 广州能源研究所,广东 广州 510640
  • 折叠

摘要

Abstract

A porous manganese oxide(MnOx)as desulfurization material was prepared by template method.The desulfurization performance and reaction kinetics of porous MnOx were studied.The results show that the pores in the MnOx is mainly mesoporous with a small amount of macropores,which can improve the desulfurization performance of the material.With the increase of desulfurization temperature,the desulfurization performance of porous MnOx first increases and then decreases.In this study,at 450℃,the desulfurization performance of porous MnOx is the best,and the desulfurization rate is as high as 0.316 gSO2/gmaterial·h.The desulfurization capacity is as high as 0.707 gSO2/gmaterial,and the conversion rate is 95.91%.

关键词

尾气脱硫/氧化锰/脱硫性能/动力学

Key words

Exhaust desulfurization/Manganese oxide/Desulfurization performance/Reaction kinetics

分类

资源环境

引用本文复制引用

汪昭玮,马继,李兴..多孔氧化锰的脱硫性能及其反应动力学[J].材料科学与工程学报,2025,43(1):55-61,7.

基金项目

国家重点研发计划项目(2021YFB3701005) (2021YFB3701005)

广州市科技计划项目(2023A03J0092) (2023A03J0092)

材料科学与工程学报

OA北大核心

1673-2812

访问量6
|
下载量0
段落导航相关论文