太阳能Issue(3)：90-96,7.DOI:10.19911/j.1003-0417.tyn20240407.01
基于ANSYS的低温环境下的光伏组件弯曲研究
RESEARCH ON BENDING OF PV MODULES IN LOW TEMPERATURE ENVIRONMENTS BASED ON ANSYS
周阳 1徐春江 2黄红娜3
作者信息
- 1. 晶澳(扬州)太阳能科技有限公司,扬州 225000||晶澳(扬州)新能源有限公司,扬州 225000
- 2. 晶澳(扬州)新能源有限公司,扬州 225000
- 3. 晶澳(扬州)太阳能科技有限公司,扬州 225000
- 折叠
摘要
Abstract
This paper focuses on the bending deformation of PV modules under low temperature environments.Fnite element analysis software ANSYS is used to simulate,the bending deformation of PV modules under different environmental temperatures,frame materials,and trame structures.The simulation results show that as the environmental temperature decreases,the deformation of PV modules with aluminum frames increases significantly,with the deformation primarily concentrated at both ends of the PV modules.At an environmental temperature of-40℃,the overall deformation of PV modules with 35-frame(frame cross-sectional thickness of 35 mm)is slightly greater than that of modules with 30-frame(frame cross-sectional thickness of 30 mm).Furthermore,at an environmental temperature-40℃,PV modules with polyurethane frames exhibit less deformation compared to those with aluminum frames,making polyurethane a preferred frame material for PV modules in severe cold regions.关键词
光伏组件/低温环境/弯曲变形/有限元分析/铝边框/聚氨酯边框Key words
PV modules/low temperature environments/bending deformation/finite element analysis/aluminum frame/polyurethane frame分类
信息技术与安全科学引用本文复制引用
周阳,徐春江,黄红娜..基于ANSYS的低温环境下的光伏组件弯曲研究[J].太阳能,2025,(3):90-96,7.
