印染助剂2025，Vol.42Issue(3)：40-44,5.
阻燃防紫外纯棉工装面料的制备及性能
Preparation and performance of flame retardant and UV protection cotton tooling fabric
摘要
Abstract
In order to improve the flame retardant and UV protection of pure cotton tooling fabric,cationic guar gum(CG)and phytic acid(PA)were used as flame retardants,and the fabric was treated by electrostatic layer-by-layer self-assembly method.Then,benzotriazole(BTA)ultraviolet agent was used to perform UV pro-tection combined finishing on the flame retardant fabric.The apparent morphology,chemical structure,tensile properties,thermal stability,limiting oxygen index,vertical combustion performance,UV protection,moisture absorption of the fabric were tested.The results showed that after flame retardant,and flame retardant with UV protection combined finishing,grooves appeared on the cotton fiber,twisted and contracted,and the sur-face of the cotton fiber was covered with particulate matter.The thermal stability of the fabric was improved after flame retardant finishing.When the number of assembly layers was 8 LBL,the breaking strength of the fabric decreased by 14.34%,the elongation at break increased by 49.91%,and the LOI increased to 26.3%.When the concentration of ultraviolet agent was 80 g/L,the UPF of the fabric was 51.97,and the moisture ab-sorption and diffusion performance decreased.关键词
纯棉/工装/阻燃/防紫外/强力Key words
cotton/tooling/flame retardant/UV protection/tensile strength分类
轻工业引用本文复制引用
李明,刘建伟,刘伟,赵翰章,宋万龙,王泽..阻燃防紫外纯棉工装面料的制备及性能[J].印染助剂,2025,42(3):40-44,5.基金项目
邢台市重点研发计划项目(2022ZZ002) （2022ZZ002）
