山东理工大学学报（自然科学版）2025，Vol.39Issue(4)：30-34,5.
动力电池模组电芯处理自动化设计与试验
Design and testing of automation for cell processing in power battery modules
谭瑞亮 1孙洪磊 1王晓波 1宋志才 1朱要臻1
作者信息
- 1. 潍柴动力股份有限公司,山东 潍坊 261061
- 折叠
摘要
Abstract
After manual transportation,cleaning,and gluing of the power battery module cells,problems such as incomplete surface cleaning and uneven gluing arise,causing difficulty in stacking the cells or the cells not being stacked securely,and ultimately affect product yield.This study designs a method and de-vice suitable for cleaning and gluing battery cells,which sequentially performs the following processes on the conveyor line:the feeding of battery cells,visual detection of positive and negative electrodes of cells,cleaning one side of the cell,flipping of the cell,cleaning of the other side,gluing and removal of the battery cell,forming a fully automatic battery cell cleaning and gluing process except for loading and unloading.Using production rhythm,dyne value,and amount of glue used as experimental factors,a comparative experiment was conducted between the designed automatic line and manual line.The results showed that the automatic line increased production rhythm by nearly 4 times,and the automatic glue ap-plication reduced the glue usage compared to manual glue application by up to 133%,greatly reducing glue waste.关键词
电芯/模组堆码/电芯清洗/电芯涂胶Key words
battery cells/module stacking/cell cleaning/coating of battery cells with adhesive分类
信息技术与安全科学引用本文复制引用
谭瑞亮,孙洪磊,王晓波,宋志才,朱要臻..动力电池模组电芯处理自动化设计与试验[J].山东理工大学学报（自然科学版）,2025,39(4):30-34,5.
