塑料科技2025，Vol.53Issue(2)：127-130,4.DOI:10.15925/j.cnki.issn1005-3360.2025.02.023
塑料光纤面板的改进
Improvement of Plastic Fiber Optic Panel
刘永梅 1常桂龙 1王三昭 1石攀 1刘浩然 1明玥彤1
作者信息
- 1. 中建材光芯科技有限公司,山东 枣庄 277000
- 折叠
摘要
Abstract
Poly(methyl methacrylate)(PMMA)has good transparency.Using PMMA as the raw material,plastic optical fiber panels were prepared by prefabricating polymer fiber rods,drawing them into fibers,and then hot-pressing them into panels.The results showed that as the holding time increased,the imaging performance of the plastic optical fiber panel first improved and then decreased.The optimal holding time was 6 h,which is 2 h longer than the theoretical holding time.Adjusting the prefabrication process of the polymer fiber rods to produce clean-surfaced multifilaments can reduce the impact of impurities on the boundaries of the multifilaments,lower the hot-pressing pressure,and decrease the pressing scale.This leads to the production of plastic optical fiber panels with clear and complete imaging.This method can reduce the production cost of fiber panels and result in a lighter product weight.关键词
光纤面板/塑料光纤/成像/数值孔径Key words
Fiber optic panel/Plastic optical fibre/Image formation/Numerical aperture分类
信息技术与安全科学引用本文复制引用
刘永梅,常桂龙,王三昭,石攀,刘浩然,明玥彤..塑料光纤面板的改进[J].塑料科技,2025,53(2):127-130,4.
