压力容器2025，Vol.42Issue(1)：61-68,8.DOI:10.3969/j.issn.1001-4837.2025.01.008
人孔的标准化设计及工程应用研究
Research on standardized design and engineering application of manhole
陶钧 1张运强 1李小梅 1岳国印 1邢宪宁 1李晓波 1石平非 1赵栓柱1
作者信息
- 1. 中国寰球工程有限公司 北京分公司,北京 100012
- 折叠
摘要
Abstract
In view of the current situation that non-standard design of manhole parts of pressure vessels often appears in actual engineering design,based on the analysis of the current industry standard of manhole,this paper summarizes the reasons for the non-standard design of manhole in practical engineering design.Standard manhole drawings based on the American standard flange is studied and compiled.The parts range,material range,fastener selection principle,marking method of standard manhole drawings are expounded.The engineering application examples of manhole standard drawings are listed.Some suggestions on fastener selection of manhole parts are put forward from the perspective of material.关键词
压力容器/人孔/标准化设计/工程应用Key words
pressure vessel/manhole/standardized design/engineering application分类
机械制造引用本文复制引用
陶钧,张运强,李小梅,岳国印,邢宪宁,李晓波,石平非,赵栓柱..人孔的标准化设计及工程应用研究[J].压力容器,2025,42(1):61-68,8.
