| 注册
首页|期刊导航|中国造纸|卷烟纸参数对卷烟锥高的影响

卷烟纸参数对卷烟锥高的影响

李欢 王迅 唐小雪 康金岭 李宇飞 陈飞程 柴精精 彭罡星 王建民 周利军

中国造纸2025,Vol.44Issue(3):70-75,6.
中国造纸2025,Vol.44Issue(3):70-75,6.DOI:10.11980/j.issn.0254-508X.2025.03.009

卷烟纸参数对卷烟锥高的影响

Effect of Cigarette Paper Parameters on Cigarette Cone Height

李欢 1王迅 2唐小雪 3康金岭 1李宇飞 1陈飞程 4柴精精 1彭罡星 1王建民 5周利军2

作者信息

  • 1. 广西中烟工业有限责任公司柳州卷烟厂,广西 柳州,545001
  • 2. 山东中烟工业有限责任公司青岛卷烟厂,山东 青岛,266100
  • 3. 广西中烟工业有限责任公司技术中心,广西 南宁,530001
  • 4. 广西中烟工业有限责任公司物流中心,广西 南宁,530001
  • 5. 郑州轻工业大学烟草科学与工程学院,河南 郑州,450000
  • 折叠

摘要

Abstract

In order to explore the influence of cigarette paper parameters on combustion cone height,six cigarette paper parameters includ-ing quantitative and air permeability were selected according to the principle of uniform experimental design.Twelve cigarette samples with different parameter levels were rolled and subjected to one-way analysis of variance and regression analysis.The results showed that the ciga-rette cone heights corresponding to 12 different combinations of cigarette paper parameters ranged from 7.958 to10.455 mm,with relative standard deviation ranging from 2.5%to 11.7%.The comprehensive effect of four cigarette paper parameters,including breathability,sodi-um potassium ratio,magnesium carbonate addition,and combustion assisting dose,could explain 94.0%of the variation in cone height,which was the main factor affecting cigarette cone height.Quantification and acid radical type were secondary factors affecting cone height.When the main factor had a small impact on cone height,the cone height of cigarettes was lower,which was beneficial for reducing the ten-dency of combustion cone to fall off.

关键词

卷烟纸/锥高/均匀实验/卷烟燃烧锥

Key words

cigarette paper/cone height/uniformity test/cigarette combustion cone

分类

轻工业

引用本文复制引用

李欢,王迅,唐小雪,康金岭,李宇飞,陈飞程,柴精精,彭罡星,王建民,周利军..卷烟纸参数对卷烟锥高的影响[J].中国造纸,2025,44(3):70-75,6.

基金项目

广西中烟工业有限责任公司科技创新项目(GXZY-CX2023A006). (GXZY-CX2023A006)

中国造纸

OA北大核心

0254-508X

访问量2
|
下载量0
段落导航相关论文