制冷技术2025，Vol.45Issue(1)：68-73,87,7.DOI:10.3969/j.issn.2095-4468.2025.01.204
中央空调末端系统新风比例优化研究
Research on Optimization of New Air Proportion in Terminal of Central Air Conditioning
摘要
Abstract
During the actual operation,the excess cooling capacity from the refrigeration host is always wasted.A model of an air handling unit is built and the impact of the percentage of fresh air on the cooling load is verified.The Simulink toolbox is used to build the air handling unit model.The air temperature and humidity in the room,and the inlet and outlet temperature of the chilled water are simulated.The results show the simulation error of air and water are lower than 3%,and 5%,respectively.This indicates that the simulation model has high simulation accuracy.Four different fresh air ratios are used for simulation.Under the condition that the chilled water flow is unchanged,and the larger the proportion of fresh air,the greater the cooling load.When the fresh air ratio is 20%,the indoor temperature can reach the set value.关键词
空气处理单元/新风比/仿真建模/中央空调系统Key words
Air handling unit/Percentage of new air/Simulation modeling/Central air conditioning system分类
通用工业技术引用本文复制引用
陈璐瑶,肖楚鹏,黎强,陈焕新,张丽,张鉴心..中央空调末端系统新风比例优化研究[J].制冷技术,2025,45(1):68-73,87,7.基金项目
国家自然科学基金(No.51876070). （No.51876070）
