大连工业大学学报2025，Vol.44Issue(2)：92-97,6.DOI:10.19670/j.cnki.dlgydxxb.2025.0203
PEK-PPI/CF耐磨复合材料的制备与性能
Preparation and properties of PEK-PPI/CF wear-resistant composites
摘要
Abstract
Wear-resistant PEK-PPI/CF composites were prepared using amorphous poly(aryl ether ketone)(PEK-PPI)as the matrix resin and carbon fiber(CF)as the wear-resistant filler through the ball-milling and high temperature molding methods.The effects of carbon fiber length and content on the friction and wear properties and mechanical strength of the composites were investigated.The results indicated that the incorporation of carbon fiber displayed a positive impact on the formation of transferring film and a reduction in the friction coefficient,thus effectively enhanced the wear-resistant properties of PEK-PPI/CF composites.The wear-resistant properties of the composites were enhanced with the length and content of carbon fiber increasing.When the dimension of carbon fiber was 50 mesh and its content was 40％,the volume wear rate of the composites was lowest to 5.782 ×10-16,whose wear resistance was improved by two orders of magnitude compared to pure PEK-PPI resin.The thermal conductivity of the composites was significantly improved by adding carbon fiber and was beneficial to the diffusion of temperature near the friction point,which eventually generate a reduced volumetric wear rate.关键词
无定形聚芳醚酮/碳纤维/复合材料/耐磨材料Key words
PEK-PPI/carbon fiber/composites/wear-resistant material分类
化学工程引用本文复制引用
王向地,孙雁宾,王志超,夏英,王书唯,王志鹏,李晓丹..PEK-PPI/CF耐磨复合材料的制备与性能[J].大连工业大学学报,2025,44(2):92-97,6.基金项目
辽宁省教育厅高等学校基本科研项目(J202104) （J202104）
吉林省科技发展计划项目(20210101289JC). （20210101289JC）
