设备监理Issue(2)：26-29,62,5.DOI:10.19919/j.issn.2095-2465.2025.04.007
加氢反应器封头热处理试板取样问题给监造的思考
Thoughts of Manufacturing Supervision on Sampling of Heat Treatment Test Plate for Hydrogenation Reactor Head
宋飚 1张刘伟1
作者信息
- 1. 南京三方化工设备监理有限公司 南京 210036
- 折叠
摘要
Abstract
Through the supervision of the manufacturing process of 2.25Cr-1Mo-0.25V Ⅳ forged welded hydrogenation reactor,combined with the problem found by the supervisors that the reactor head did not conform to the design confirmation documents during the process of obtaining and heat treatment of test plates,used the method of equipment engineering supervision to analyze the reasons for the problem,seek solutions to the problem,track the results of problem handling,and summarize the process documents of problem handling.In the end,a closed-loop was formed for the problem.Through the analysis of the problem and the summary of the process and methods for solving it,it provides reference for the key process node of obtaining and heat treatment of test forged welded hydrogenation reactor head in the future manufacturing process.关键词
加氢反应器/封头热处理试板/取样偏差/监理服务Key words
Hydrogenation reactor/Hot-treated test plate for flanges/Sampling bias/Supervision service引用本文复制引用
宋飚,张刘伟..加氢反应器封头热处理试板取样问题给监造的思考[J].设备监理,2025,(2):26-29,62,5.
